Masuncion

49k miles, on and off grinding noise when turning, very inconsistent. Reading other post it could be bearings, but at this low mileage? Is this cover under driver train warranty? If not estimate cost? Any help appreciated.

ibidu1

iTrader: (1)

Sounds like a wheel bearing. It could also be a brake dust shield, ive had that happen to me before.

chuckGS350

How are your tires? Are they dry?
I had an on and off grinding noise when turning at slow speed. Replaced the tires, noise is gone.

3gs350awd

Mine does the same. Only when going fast on the highway. I hit the curb with one wheel it was out aligned. But alignment didn't help. Only grinds when I turn left. Grinding noise.

IXI187IXI

iTrader: (3)

could be as simple as brakes or it could be a bearing. it doesnt matter how many miles you have on your car, theres is no set mileage for when things go bad.

Masuncion

Thanks for everyone's feedback. Took it to a mechanic today and they found a rock stuck in the backing plate that was causing the noise. Took a lot of work removing the routers but the noise is gone.

onephatguy

iTrader: (3)

Something so simple. At least it wasn't anything major and expensive. I'm going to have to check mine out this weekend. I have a similar noise.