How to reset oil maintenance warning?
11-29-10, 04:32 PM
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2010
Location: Ny
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
How to reset oil maintenance warning?
Just changed the oil on my 2006 430, how do I reset the warning message on the dash? I don't have an owners manual so any help is appreciated.
Thanks in advance
Thanks in advance
11-29-10, 04:58 PM
#2
Driver
Join Date: Oct 2009
Location: WI
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
This may work for the 430 but not sure
Are you getting the OIL MAINT RESET message? If so, here's how to get rid of it:
Push the “ODO TRIP” button in the switch box to change the display to current mileage (neither Trip A nor Trip B).
Turn the engine off.
Push engine-on button once (with foot off the gas pedal) to go to ACC mode. Press and hold “RESET” and "ODO TRIP" buttons down simultaneously.
Hold both buttons down for 7-10 seconds after the ACC mode is on. After the above operation, the master warning light comes on, a warning tone sounds and the above message appears to inform you that the engine oil maintenance data has been reset.
__________________
Are you getting the OIL MAINT RESET message? If so, here's how to get rid of it:
Push the “ODO TRIP” button in the switch box to change the display to current mileage (neither Trip A nor Trip B).
Turn the engine off.
Push engine-on button once (with foot off the gas pedal) to go to ACC mode. Press and hold “RESET” and "ODO TRIP" buttons down simultaneously.
Hold both buttons down for 7-10 seconds after the ACC mode is on. After the above operation, the master warning light comes on, a warning tone sounds and the above message appears to inform you that the engine oil maintenance data has been reset.
__________________
Thread
Thread Starter
Forum
Replies
Last Post
