SLOW4DR

iTrader: (2)

Are the offsets correct? What's the wheel design like? You should have all kinds of clearance with a +30 since it's pushing the face farther away from the hub. I put my 20x10 +30 up front and I had plenty of clearance.

ksan

I forgot what my vendor told me the type of wheel design my wheels are. My wheels are from Rennen International, CSL 2 series. The spokes is kind of concave and flat. But exatacly i see alot of people on the forums running +30s up front or even less and never ran into this issue. Im just so annoyed after getting everything ready for the summer i run to a stupid issue like this.

I got in contact with a fellow member and was suggesting a 10mm wheel spacer up front, but i tried a 8mm and still did not clear. Also even tried my +20 up fronts and it sits on the hub, but still against the caliper and scrapes against the inside of my wheel. I hate doing the math and i believe i would be ok with a 12mm spacer?

VDMTom

iTrader: (1)

So who's running 11 width on the rear?

I need to order a set for daily/aggressive fitment. I'm curious if a 11 +30 with 265/30/19 & -4 camber will clear the inner strut?

I'll start digging around...

SLOW4DR

iTrader: (2)

I will be next year lol. Im more worried about clearing the fender more so than the strut since the +30 is fairly low for our cars

ksan

what is the lowest offset you can run on a 20x10 up front with a 235/35 tire, without rolling the fenders?

Andrew@SonicMS

iTrader: (1)

Decided to just rock Vossens as my wheels for now.. Vossen CVT in 19x8.5 / 19x10. I did not get the standard Lexus offsets, but rather the more aggressive offsets that were meant for the Nissan 350z/370z. Ran 235/35/19 / 265/30/19 Toyo T1 Sport tires.

I also switched out the Teins I had for some BC Racing coilovers.



I'm loving the look.

Diesel350

Wow that looks nice, what offsets did you go with?

Andrew@SonicMS

iTrader: (1)

19x8.5 +15 / 19x10 +20

My rear is perfect right now, the front will go down about 8mm in height then it'll be perfect

ksan

did you have to roll the front fenders? looks very nice btw!!

tmf2004

iTrader: (15)

that looks really good Tom

Diesel350

Yeah it looks like spot on perfect fitment. No rubbing issues? No fender mods?

Andrew@SonicMS

iTrader: (1)

My front fenders are shaved just like my rears. No rub My front is actually lower now to even out with the rear.

Thank you sir!

265/30/19 Toyo T1 Sport on 19x10 +20 cleanly tucked Almost zero stretch..
I have both of the Megan Racing Upper Camber Arms & the Toe Arm.

Yes, I had my front and rear fenders shaved, no rubbing issues.

masboy

iTrader: (30)

dang Tom@SonicMS, ur car looks nice! love the kit. ahh u have 19x10 +20 on rear.

Diesel350

Thanks, for the info, I was thinking of going with wider rims, 9 front/10.5 rear with more conservative offsets and wider tires but your setup looks great with the slightly thinner rims and more aggressive offsets.

Andrew@SonicMS

iTrader: (1)

Thanks buddy, get those upper arms in and you'll be running more camber!

Yeah, the offsets I chose took some work to make it fit well, but nothing a good shop can't do. Glad my tech is very experienced with what sections to shave and not to shave.

Thanks for the positive feedback.. I'll get more photos up this wee/weekend !