3GS wheel thread
08-05-12, 07:17 AM
#871
Driver School Candidate
Join Date: May 2011
Location: Ca
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Front fender bumper tab relocation
08-11-12, 11:29 PM
#876
Driver
iTrader: (3)
Join Date: Mar 2009
Location: cali
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Really depends on how low you're gonna go. Im super dumped and my specs are 19x9 +11(without my 15mm spacers)225/35 and 19x10 +13 235/35. I had to roll the front fenders flat and had to shave the front bumper mounts. The rear quarters I had to shave completely and also had to shave the bumper mounts. I can run another 5mm in the rear without any issues so i don't think you'll have an issue running +10 offset. I've since pulled the fronts just a tad and added 15mm spacers(making front specs 19x9 -4) and i have no problem turning at all. Heres the thread to my pics...
https://www.clublexus.com/forums/gs-...pro-shots.html
https://www.clublexus.com/forums/gs-...pro-shots.html
08-15-12, 08:14 PM
#878
Driver School Candidate
Join Date: Oct 2007
Location: California
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
08-21-12, 08:12 PM
#879
Driver School Candidate
Join Date: Oct 2011
Location: Mo
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
I'm new to the forums. Any suggestions are greatly appreciated so please feel free to advise. I have a set of 20" Maya ST5. Here are the specs:
20x9 with +30 offset and 20x10.5 with +29offset
I would like the fenders to barely tucks the tires.
What suspension and what size tires would you all recommend. (I'm planning on shaving the rear wheel wells.) Thanks in advance!!
I'm new to the forums. Any suggestions are greatly appreciated so please feel free to advise. I have a set of 20" Maya ST5. Here are the specs:
20x9 with +30 offset and 20x10.5 with +29offset
I would like the fenders to barely tucks the tires.
What suspension and what size tires would you all recommend. (I'm planning on shaving the rear wheel wells.) Thanks in advance!!
08-23-12, 01:28 PM
#881
Driver School Candidate
Join Date: Aug 2012
Location: IN
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
New to the Forum - Converted from Infiniti - no regrets so far. Quick wheel/tire question - Will I have any issues putting 235/35-19's with a +30 offset on a stock suspension setup? Wheels are 19x9.
Thank you.
Thank you.
08-26-12, 05:51 AM
#883
08-27-12, 01:01 PM
#884
Driver School Candidate
iTrader: (2)
Join Date: Jul 2012
Location: CA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Hey all. This is in no way to hi-jack or backdoor the classified ads rules, but was wondering how much you guys think I can get for these wheels. I'm parting out my GS350.
Work Wheels VS-FX 20" x 9" +36 R-Disk 5-114.3 Silver
Work Wheels VS-FX 20" x 10" +32 O-Disk 5-114.3 Silver
with Falkens 245/30/20 and 275/25/20
These wheels are discontinued from Work. I wish I had better photo skills, but here's what I managed to shoot. Also, first time posting pics so bare with me if pics don't show up right.
Thanks again for all your input.
Work Wheels VS-FX 20" x 9" +36 R-Disk 5-114.3 Silver
Work Wheels VS-FX 20" x 10" +32 O-Disk 5-114.3 Silver
with Falkens 245/30/20 and 275/25/20
These wheels are discontinued from Work. I wish I had better photo skills, but here's what I managed to shoot. Also, first time posting pics so bare with me if pics don't show up right.
Thanks again for all your input.
Last edited by madman66; 08-27-12 at 01:12 PM. Reason: Grammar and pics