Go Back   Club Lexus Forums > Lexus Model Forums > GS Models > GS - Third Generation
Sign in using an external account
Register Forgot Password?

HELP!!! GS430 Changed Brakes "CHECK VSC" + "CHECK ECB"

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 07-06-09, 03:24 PM   #1
VIPNiSS
Lexus Test Driver
Trader Score: (2)
 
Join Date: Sep 2004
Location: Atlanta
Posts: 806
Send a message via AIM to VIPNiSS
Default HELP!!! GS430 Changed Brakes "CHECK VSC" + "CHECK ECB"

I need help!! I have an 06 GS430 and changed my brake pads today. I followed procedure and even opened up the reservoir cap while doing this.

I finish.. start the car up.. and i get "check vsc" and "check ecb"... my brakes light and abs light is on..

any ideas guys??


UPDATE

so i just realize this could be a part of my issue.. when i did the the brakes i forgot to take off my parking brake.. i then kind of force the front caliper out a little bit and then compressed the piston!

that should explain why my parking brake light is on and ABS.

My parking brake doesnt even work when i press it all the way down now. Is there a way I can reset this?
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!

Last edited by VIPNiSS; 07-08-09 at 03:35 PM..
VIPNiSS is offline   Reply With Quote
Old 07-06-09, 04:22 PM   #2
passnu2
Lexus Fanatic
Trader Score: (33)
 
passnu2's Avatar
 
Join Date: Feb 2007
Location: .....
Posts: 13,931
Default

Have you driven the car at all? What is the ecb code for anyway?

Can you pull the codes? I can tell you what it is if you can get me the codes•
__________________
passnu2 is offline   Reply With Quote
Old 07-06-09, 08:13 PM   #3
VIPNiSS
Lexus Test Driver
Trader Score: (2)
 
Join Date: Sep 2004
Location: Atlanta
Posts: 806
Send a message via AIM to VIPNiSS
Default

Quote:
Originally Posted by passnu2 View Post
Have you driven the car at all? What is the ecb code for anyway?

Can you pull the codes? I can tell you what it is if you can get me the codes•
I have not pulled the codes yet. I will see if I can even pull any codes.. I have driven the car about 10 miles.. i even pulled the battery for about 30 minutes and it is still on.
VIPNiSS is offline   Reply With Quote
Old 07-06-09, 11:21 PM   #4
XxGoKoUxX
Lexus Champion
Trader Score: (0)
 
XxGoKoUxX's Avatar
 
Join Date: Jul 2009
Location: FL
Posts: 2,869
Send a message via AIM to XxGoKoUxX Send a message via MSN to XxGoKoUxX Send a message via Yahoo to XxGoKoUxX
Default

from a quick GOOGLE... i believe you need to bleed ur brakes? i could be wrong lol.... for the VSC...isn't that traction control?
XxGoKoUxX is offline   Reply With Quote
Old 07-08-09, 10:07 AM   #5
VIPNiSS
Lexus Test Driver
Trader Score: (2)
 
Join Date: Sep 2004
Location: Atlanta
Posts: 806
Send a message via AIM to VIPNiSS
Default

soo.. does anyone know if air in my brakes would cause this?

Currently the traction control light is on, ABS, and Brakes light..

The brake peddle is really STIFF and not soft like it used to be.
VIPNiSS is offline   Reply With Quote
Old 07-08-09, 11:08 AM   #6
EyeKutr
Moderator
Trader Score: (5)
 
EyeKutr's Avatar
 
Join Date: Aug 2005
Location: Riverside, CA
Posts: 2,556
Send a message via AIM to EyeKutr
Default

Quote:
Originally Posted by TtOrMaMnY View Post
soo.. does anyone know if air in my brakes would cause this?

Currently the traction control light is on, ABS, and Brakes light..

The brake peddle is really STIFF and not soft like it used to be.
air in the lines should give a soft pedal, not a stiff one.....
__________________

'06 GS300 ML / NAV , VAIS SLI, LED side mirrors (DIY), BT Nav bypass (DIY), Pics of my car
'04 GX470 ML / Nav / 3rd Row / XD 6000k HIDs
EyeKutr is offline   Reply With Quote
Old 07-08-09, 11:40 AM   #7
VIPNiSS
Lexus Test Driver
Trader Score: (2)
 
Join Date: Sep 2004
Location: Atlanta
Posts: 806
Send a message via AIM to VIPNiSS
Default

Hrmmmmmm. Yeah the pedal is stiff and brakes don't want to engage almost. You have to use more effort on the pedal
VIPNiSS is offline   Reply With Quote
Old 07-08-09, 11:53 AM   #8
Lexus GS3
Trouble Maker
Trader Score: (1)
 
Lexus GS3's Avatar
 
Join Date: Oct 2001
Location: *626*California
Posts: 1,735
Send a message via AIM to Lexus GS3
Default

I would check your speed sensor.. It happened to me before when i had my 2002 GS.. I installed my coilovers and changed my brake pads. Damaging the speed sensor wire will cause the VFC, and Traction control light to come on. I had to replace the speed sensor wire. $250 plus
__________________
Lexus GS3 is offline   Reply With Quote
Old 07-08-09, 12:00 PM   #9
spine911
Lead Lap
Trader Score: (4)
 
spine911's Avatar
 
Join Date: Jan 2009
Location: ca
Posts: 440
Default

The brakes are stiff because there is no electronic assist AFTER you completed your brake job...ECB stands for Electronic Controlled Brake System, DOUBLE check the brakes, make sure all connections are properly connected-this includes the sensors.

Check the basics first before going further to more complex possibilities
__________________
"I couldn't find the sports car of my dreams, so I built it myself." - Dr. Ferdinand Porsche
spine911 is offline   Reply With Quote
Old 07-08-09, 12:23 PM   #10
VIPNiSS
Lexus Test Driver
Trader Score: (2)
 
Join Date: Sep 2004
Location: Atlanta
Posts: 806
Send a message via AIM to VIPNiSS
Default

Quote:
Originally Posted by Lexus GS3 View Post
I would check your speed sensor.. It happened to me before when i had my 2002 GS.. I installed my coilovers and changed my brake pads. Damaging the speed sensor wire will cause the VFC, and Traction control light to come on. I had to replace the speed sensor wire. $250 plus
Crap!!!!! Don't tell me that. Anyone know where the speed sensor is located?

Also is it bad to drive the car like that for a couple of days?
VIPNiSS is offline   Reply With Quote
Old 07-08-09, 03:35 PM   #11
VIPNiSS
Lexus Test Driver
Trader Score: (2)
 
Join Date: Sep 2004
Location: Atlanta
Posts: 806
Send a message via AIM to VIPNiSS
Default

UPDATE

so i just realize this could be a part of my issue.. when i did the the brakes i forgot to take off my parking brake.. i then kind of force the front caliper out a little bit and then compressed the piston!

that should explain why my parking brake light is on and ABS.

My parking brake doesnt even work when i press it all the way down now. Is there a way I can reset this?
VIPNiSS is offline   Reply With Quote
Old 07-09-09, 12:14 AM   #12
XxGoKoUxX
Lexus Champion
Trader Score: (0)
 
XxGoKoUxX's Avatar
 
Join Date: Jul 2009
Location: FL
Posts: 2,869
Send a message via AIM to XxGoKoUxX Send a message via MSN to XxGoKoUxX Send a message via Yahoo to XxGoKoUxX
Default

take it to lexus?
XxGoKoUxX is offline   Reply With Quote
Old 07-09-09, 03:27 AM   #13
IXI187IXI
Lexus Fanatic
Trader Score: (3)
 
IXI187IXI's Avatar
 
Join Date: May 2008
Location: Philly
Posts: 8,107
http://www.facebook.com/profile.php?id=100000548829927 AWD GS
Default

your speed sensor is behind the rotor towards the front side (front side meaning towards the bumper)
__________________

2006 Lexus GS 300 AWD – Glacier Frost Mica - Black - ML Package
20" x 8.5" Status Knight Wheels Black with Machine Face | Bridgestone G-Force Tires 245/30/20 | BC Racing Coilovers | Carson Tuned Lip Kit | 3000k HID Fogs | Prestigious Society Navi/DVD Override Kit | 15% Tint | Black Roof and Window Trim
IXI187IXI is offline   Reply With Quote
Old 07-09-09, 07:44 AM   #14
VIPNiSS
Lexus Test Driver
Trader Score: (2)
 
Join Date: Sep 2004
Location: Atlanta
Posts: 806
Send a message via AIM to VIPNiSS
Default

I broke down and made appointment with Lexus at 12:30 today. Going to have hem look at the ac odor as well and other things that been bothering me. I got extended warranty so hopefully they will fix my f up. I just have to pay $100 deductible.
VIPNiSS is offline   Reply With Quote
Old 07-09-09, 12:43 PM   #15
VIPNiSS
Lexus Test Driver
Trader Score: (2)
 
Join Date: Sep 2004
Location: Atlanta
Posts: 806
Send a message via AIM to VIPNiSS
Default

Ok boys. She's at the dealership an I got a loaner es350. Boooooo. They are changing my steering rack under tsb. Also something with the rear caliper under tsb. Having them look at the AC odor as well. Also the auto headlights not shutting off automatically sometimes.
VIPNiSS is offline   Reply With Quote
Old 07-09-09, 12:43 PM
 
 
 
 
Reply

Tags
430, abs, alignment, brake, brakes, change, changed, check, ecb, gs, gs430, lexus, light, reset, vsc

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can someone help me "Check VSC" Mr.Wi66L3z GS - Third Generation 32 09-09-14 06:10 PM
vsc and ecb mad4ever GS - Third Generation 3 05-26-13 03:22 PM
How to clear the VSC, ECB light n0sGS300 GS - Third Generation 0 12-13-12 12:47 AM
'07 GS450h brake issues/warnings mike2150 Hybrid Technology 1 04-02-12 01:01 PM
i change brake pads now all brake lights are on nalonrico GS - Third Generation 13 12-13-11 03:08 PM

All times are GMT -7. The time now is 09:32 PM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info