1999 GS300 ABS module bad
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2007
Location: TX
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
1999 GS300 ABS module bad
I just bought a 99 GS300 with a hard brake pedal and beeeeeeeeeeeeeeeping noise. Brake light is on but the other 2 VTC and I never see they on (maybe previous owner disabled).
I been research forever for a fix solution with out spending $2200 for a new one or gamble with another old one like $400-$500.
so I pull the 2 wires that go to the beep speaker right on top of the brake pedal. That **** give me headache . DISABLED that.
I took ABS unit out the car 4 screws from inside and pull the pin. I pulled all the plug and the unit wiggle wiggle it out.
lose 2 wires from the module to the motor and applied 12V direct from the battery, NOTHING happened. No turning, no noise. So... I lose 2 allen screws that motor mounted on and the other 2 allen screws from the adapter plate (between the motor and the .... fixture). Bend the plate behind the motor and then took the motor apart.
First thing I noticed is the 2 pieces of the collectors are missing ... or ... dusted...
I hope this is the common issue that everyone and I frustrated about.
Now I need help to find the collector piece, where to buy/order. I took few measurements so yall can help me or yourself.
Check out the pics.
2 of the collectors are gone.
~0.84in diameter of the collectors
~0.875 upper bearing
~0.59 in bottom bearing
I been research forever for a fix solution with out spending $2200 for a new one or gamble with another old one like $400-$500.
so I pull the 2 wires that go to the beep speaker right on top of the brake pedal. That **** give me headache . DISABLED that.
I took ABS unit out the car 4 screws from inside and pull the pin. I pulled all the plug and the unit wiggle wiggle it out.
lose 2 wires from the module to the motor and applied 12V direct from the battery, NOTHING happened. No turning, no noise. So... I lose 2 allen screws that motor mounted on and the other 2 allen screws from the adapter plate (between the motor and the .... fixture). Bend the plate behind the motor and then took the motor apart.
First thing I noticed is the 2 pieces of the collectors are missing ... or ... dusted...
I hope this is the common issue that everyone and I frustrated about.
Now I need help to find the collector piece, where to buy/order. I took few measurements so yall can help me or yourself.
Check out the pics.
2 of the collectors are gone.
~0.84in diameter of the collectors
~0.875 upper bearing
~0.59 in bottom bearing
#2
Driver School Candidate
Thread Starter
Join Date: Jun 2007
Location: TX
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
more researches came up with Mitsubishi Pajero 2000-2003 with ABS, they are looks alike. May be Toyota and Mitsubishi favor Aisin products back then.
#4
Driver School Candidate
Thread Starter
Join Date: Jun 2007
Location: TX
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
no luck
I went to that website and couldnt find what I need. The piece I need is called "commutator".
The spec of that piece is 12p (12 tabs)
23mm outer diameter
9mm inner diameter
12mm is the length or height.
The spec of that piece is 12p (12 tabs)
23mm outer diameter
9mm inner diameter
12mm is the length or height.
#6
Driver School Candidate
Thread Starter
Join Date: Jun 2007
Location: TX
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post