PandaGS300

Hello everyone,

Needed help on where to find a replacement bushing for below. TM is no longer around so needed a place to get this.

12. Here is the bushing out of the arm.


Ebay shows this and I am thinking its the same. Just needed someone to help me confirm this.

http://www.ebay.com/itm/Hardrace-Front-Castor-Tension-Bush-Harden-Rubber-GS300-98-05-SC430-01-10-HR-7175-/181395257531?pt=LH_DefaultDomain_15&hash=item2a3bfff8bb&vxp=mtr
Thanks

kowala

iTrader: (2)

Well you can try contacting exact motorsports located here in california, last time I checked they had their own polyurethane bushings for our caster arms. There's also Figs engineering spherical bearings that IMO would be worth the premium. Might make the ride a bit harsher but the benefit of not having to worry about replacing it again is worth it, especially since it's one of our car's weak points.

Link: http://shopfigs.com/v1/index.php?rou...product_id=122

FrankT

I would use Super Pro bushings...also from AU

SPF3087K for GS 1998-2000 these have 60mm bushings
SPF4084K for GS 2000-2005 these have 65mm bushings

I found a few sources for them here in the US, FIGS is one; having them shipped from AU and or shopping around might save you a few bucks.

Mcon

iTrader: (1)

eBay have it for $65.00 and free shipping. eBay item number 40058338211. Also, Rock Auto have it. One of my best friend use the Rock Auto and work fine for hem.

PandaGS300

What website?


Doesnt exist

Mcon

iTrader: (1)

Sorry, one # was missing. Check on eBay this item number. 40058382411

Mcon

iTrader: (1)

The last 4 number was missing. Also, I said, check on Rock Auto.com
Good look

FrankT

http://www.superpro-usa.com/catalogu...0-%20LEXUS.pdf

angus

iTrader: (4)

ROCA USA sells them. Sold by megan racing.

AL98GS400

Where I ordered mine from.

http://www.rocar-usa.com/product.php...roducts_id=851

Mr Jokster

iTrader: (8)

Neither one of those numbers work, I'm assuming its suppose to be 400583382411

http://www.ebay.com/itm/400583382411?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D400583382411%26_rdc%3D1
which too isnt the correct bushing like the one below. Theres a lower control arm #1 and #2, he needs #2. This ebay post and the roca below are for arm #1


This doesnt look like the right part at all.


Also OP, be careful where you buy because as one of the posts above shows, the 98-00 has a different arm than the 01+. Too bad you removed the whole thing with the ring, you could have gotten the poly's from Lexus.

AL98GS400

Fit my 98 GS400 This is for 1 side. Lower control arm bushing and caster arm bushing. I just saw in his profile he has a 2002 though so I guess my link is bad for him after all. Dont buy from my link above 98-99.

Correct link for a 2002

http://www.rocar-usa.com/product.php...roducts_id=830

angus

iTrader: (4)

This is correct, but to clarify there is a 60mm version and 65mm version.

brainsurge

These bushings are also available from "psb"

Mcon

iTrader: (1)

I don't know what's wrong with my cellphone, I try to put something and the cellphone omitting a number but this time I did it from the computer and here are the 12 number of the parts on eBay. Also, I don't know the year of your car but in the description of the item tell you for what year work or not work. Here is the 12 number of the item on eBay. 400583382411. Are very similar to what your are posting on the first time.