headlight info about a swap
#1
Rookie
Thread Starter
iTrader: (1)
Join Date: Aug 2012
Location: NC
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
headlight info about a swap
So i purchased a gs430 with auto level factory hid. The headlights are in rough shape and im looking into a replacement. Now my question is, the replacements for oem hid are steep, is there a way to install halogen headlights? My main question is, i know i will lose autolevel which is not a big deal, ill pull the bulb out on the dash, but at the harness, can the plug for the oem ballest be tapped/swapped for the 9006 halogen plug? The halogen headlights are about half the price, so im just trying to make sure the plug at the ballast can be tapped into and use a 9006 plug. Any other issues i may come into with also?
Thanks
Thanks
#4
Pole Position
iTrader: (8)
Wait... r u saying you are buying halogen headlights and putting a hid kit in that, or buying halogen bulbs and putting them in your hid headlights? Are your headlights in bad shape or your bulbs? HID bulbs will last easily 2 times longer than halogen bulbs which makes cost more in favor of HID bulbs imo.
If you have hid headlights you should run hid bulbs.
If you have hid headlights you should run hid bulbs.
#7
I'm fairly sure on sewell the headlight units are not much more for the hid compared to halogen, I'm buying a new oem set off there (halogen) and it's gonna be 500$, I think the HIDs were only like 50$ more or something like that
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mikera
GS - 2nd Gen (1998-2005)
11
06-24-23 11:54 PM