GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

Need advice on abs vsc Check engine light on

Thread Tools
 
Search this Thread
 
Old 10-30-14, 07:19 AM
  #16  
Alphaman19
Advanced
 
Alphaman19's Avatar
 
Join Date: Feb 2012
Location: NJ
Posts: 558
Received 37 Likes on 35 Posts
Default

Can anyone tell me where the evaporator hose is located under the hood?
Old 10-30-14, 12:13 PM
  #17  
KeyKeeper
Pole Position
 
KeyKeeper's Avatar
 
Join Date: Feb 2013
Location: Texas
Posts: 207
Likes: 0
Received 5 Likes on 5 Posts
Default

Originally Posted by LStyle
Ok, I got the alternator and battery replaced. Warning light still on. Do I have to drive around for this to disappear or what would you guys recommend as the next step? Thanks in advance!!!!
Pull the ecm fuse for a short while or disconnect the positive terminal from the battery and touch it to the negative post to discharge the system/capacitors. Then reconnect battery and should go out. Or you can have an auto parts store clear it for you for free.
Old 11-01-14, 09:37 PM
  #18  
LStyle
Pole Position
Thread Starter
 
LStyle's Avatar
 
Join Date: Jan 2003
Location: Illinois
Posts: 228
Likes: 0
Received 0 Likes on 0 Posts
Default

While I did clear most of the codes with new battery and alternator, I checked the abs sensors on all four wheels. The rears are good but front are both dead. I ordered them and waiting for delivery. I will keep you posted. Thanks again for all the help. You guys are the best.
Old 11-25-15, 05:56 AM
  #19  
dreamcar88
Intermediate
iTrader: (1)
 
dreamcar88's Avatar
 
Join Date: Nov 2008
Location: De
Posts: 489
Received 6 Likes on 4 Posts
Default

Originally Posted by LStyle
While I did clear most of the codes with new battery and alternator, I checked the abs sensors on all four wheels. The rears are good but front are both dead. I ordered them and waiting for delivery. I will keep you posted. Thanks again for all the help. You guys are the best.
bumping this thread i seem to have the same problem. I replaced my gas cap and nothing.. Im getting 15 codes for evap and one for the brake master... Ill check my battery and alternator at work today.. The only thing i am experiencing with braking is the first tape of the brake it bites very hard. The next push after fine. I do hear a small wheel bearing noise from the right front but i doubt that would have anything to do with my evap codes and brake code
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SebCypher
GS - 3rd Gen (2006-2011)
3
10-18-17 08:44 PM
GSRSRT
GS - 2nd Gen (1998-2005)
20
05-26-11 08:56 PM
ZeekGS300
GS - 2nd Gen (1998-2005)
31
07-28-10 09:35 AM
FinLIFE
ES - 1st to 4th Gen (1990-2006)
2
04-09-10 05:01 PM
HGill
GS - 2nd Gen (1998-2005)
2
06-15-07 10:28 PM



Quick Reply: Need advice on abs vsc Check engine light on



All times are GMT -7. The time now is 05:56 AM.