Club Lexus Forums

Club Lexus Forums (http://www.clublexus.com/forums/)
-   GS - Second Generation (http://www.clublexus.com/forums/gs-second-generation-184/)
-   -   help! Broken oxygen sensor connector (female end, Bank 1 sensor 2) (http://www.clublexus.com/forums/gs-second-generation/742785-help-broken-oxygen-sensor-connector-female-end-bank-1-sensor-2-a.html)

StarGS3 05-19-14 08:14 AM

help! Broken oxygen sensor connector (female end, Bank 1 sensor 2)
 
My oxygen sensor (bank 1 sensor 2 ) connector (female connector, engine/ecu side) is cracked and the wires pulled out. I tried to source this from a junkyard but no one around me (LI, NY) seems to have the car.

Any ideas on where I can get a replacement connector to splice in?

iToaster 05-19-14 08:28 AM

The part number is 90980–11028, you can get one from any Lexus or Toyota dealer for less than $10.

StarGS3 05-19-14 08:55 AM

Quote:

Originally Posted by iToaster (Post 8543335)
The part number is 9098011028, you can get one from any Lexus or Toyota dealer for less than $10.

Thanks, very helpful! Do you know if this part comes with the metal inserts and rubber grommets that I'll need to rebuild the plug or is it just the plastic housing?

iToaster 05-19-14 09:31 AM

It's just the plastic housing. You should be able to remove the pins from your old connector and reuse them if they are undamaged. If you need them, 82998-12440 is the part number for the wires with the female pins on the end of them for that connector, but you would need four of them and they're each almost as expensive as the plastic connector.


All times are GMT -7. The time now is 09:24 AM.


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved