kthor

Hey Guys,
I just bought a new headunit so I can play my Iphone and have bluetooth to replace the stock headunit in my 1998 GS300 but what a pain this has become. I've installed a few radios before but never had to do a amp bipass. Well I ended up cutting one of the connectors thinking I can just splice the wires and be good but ended up cutting the wrong connector. T-T woops. I've been looking on the internet for some time now to find the correct way of which wire goes in which pin but have not had any luck. I took a blurry screenshot of a video I found but doesn't really help me. I was hoping that someone can take a good photo of the connector and really help me out (save me $250 to buy a new amp). The connector is orange and under the cd changer. Any help is highly appreciated!!! Here is the screenshot. Thank you!

czr73

Save yourself the headache and take it to a auto audio shop.

marshun

I did mine. I forgot what I used. Just search

kthor

An auto audio shop would have the same problem i would with the wires and pins in the connector. Im not worried about the trouble or work, I just dont want to have to pay $250 for an entire new amp, headunit, and speakers when I have all of that but am only missing a single wiring connector. It would also cost me $150-$175 for an audio store to do the install. Not worth it in my mind. I just need a single picture of the connector to solve my problem. Thanks again for the help and responses!

offbad

iTrader: (5)

http://www.metraonline.com/files/pro...NST71-8113.pdf