xStayTuned

iTrader: (1)

ive got an engine lined for the 2j gte swap and from what ive been reading an aristo fuel pump is needed? so just wondering where everyone is getting the pump assembly from or what the alternative is

i have been searching so sorry if its been covered but i cant seem to find the right answer.
any help, advice, or links appreciated.

thanks guys

Highway

If stock JDM ecu then you can run a supra TT pump.

xStayTuned

iTrader: (1)

The whole assembly from the supra?

JeffTsai

iTrader: (1)

No the supra pump will not fit in the GS fuel hanger unless you hack it up. The better option is to go with a Walbro 255 if your HP goals are 400-500 and Aeromotive 340 if you're HP goal is over 500. Both the Walbro and Aero are direct fit/drop in pumps and only require changing the pumps power connector. Just a quick 2 wire deal. Make sure you get the 342 versions which are the offset outlet pumps.

xStayTuned

iTrader: (1)

my question was more regarding the whole hanger assembly because theres something that has to be done with the return line i believe, i know using the oem hanger i would probably go with a walbro pump due to being turbo charged.

thanks for the input so far

JeffTsai

iTrader: (1)

The supra pump hanger assembly won't fit in these cars. If you need to add a return line, just drill a small hole on the top of the hanger and run a bulkhead fitting through it.

Highway

Thanks for clearing that up Jeff. Fit in my sc300 figured the same for the GS.

xStayTuned

iTrader: (1)

Ok so I figured out that whole return line issue thank you for that.. but I would really like to find an aristo fuel pump hanger assembly is anyone able to point me in the right direction with finding one ive been on ebay and google and havent been able to locate one to buy for the life of me.

thanks

Acer

iTrader: (3)

so when looking for the walbro fuel pump do I look for the 255 for the supra or universal? Have a link?

Acer

iTrader: (3)

any help?.....

puff

iTrader: (4)

You can get a walbro 255 for the GS. Contact http://www.swiftracing.com/SRT/default.aspx. I got a few turbo parts from them when I did my NA-T build on my old GS.

Acer

iTrader: (3)

what about the fittings for the return line? do you know where and which fittings I need?