tiger4life

iTrader: (16)

My fenders are shaved a good bit (so much that one split), but not completely flat. The wheels fit a little better since I had an alignment. If you wanted to tuck the wheel, you would probably need to run a 245, shave completely flat, and run max camber. I'm not doing those things so my rim wouldn't clear the fender.

Not happening, the front disc is low. It barely clears my stock brakes.

After I get the mufflers done.

tiger4life

iTrader: (16)

Not the best pics, but it seems to always be cloudy when I get the time. Exhaust sticks out a bit more than I wanted, but oh well.

tiger4life

iTrader: (16)

money shot

01LEXPL

iTrader: (10)

looks classy!

Rob Daddy

Where did you get the mufflers & tips from?

tiger4life

iTrader: (16)

Mufflers from ebay. Tips from advanced auto parts. They were the bolt on style. I had to remove he screws and cut off the studs. Then I made a 13 degree cut on it with an angle grinder. My brother in law tig welded the tips onto the mufflers at his workplace. Then I had the mufflers put on at a muffler shop. Wanted to have new piping made but it would have been too much of a hassle, so they welded it on right after the axle.

Rob Daddy

Do you have a link to the mufflers?

tiger4life

iTrader: (16)

they're just obx stainless center/offset mufflers

tiger4life

iTrader: (16)

They are a smaller than the Jasma mufflers (Junction Produce, 5zigen, Tanabe), but appear to be the closest match visually that is easy to obtain.

YxUxMADDDD

iTrader: (2)

Looking good. Seems as if you went through rims like girls lol. As people stated earlier, Maya is bomb bro. Maybe if the car is a little lower on the GT's, it'll probably pop more. I'm sure you're working on that right???????????????????????????????????????????????????????????????

Sevenevez

iTrader: (2)

shes nice man. rear end looks hella clean man

tiger4life

iTrader: (16)

working on the front end now.......

Acer

iTrader: (3)

Looks good.Are you going to lower it more? I like the wheel setup curious to see it lowered.Photoshop maybe?

Can you cut a piece of the exhaust piping and re weld it to make it shorter? Are the tip stainless steel?

What projectors are you using, looks good so far!

aneidiaz

I think the Maya GR5 setup looked the best. But nice ride all around!


Posted from ClubLexus.com App for Android

SHIBUI1

iTrader: (5)

Very nice and clean.