DIY - Ebay's 98-01 Land Cruiser Dual Fog Light Mod
11-14-12, 02:52 PM
#32
Pole Position
Thread Starter
iTrader: (8)
Join Date: Oct 2012
Location: Ca
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
RollLexGS This mod would not work on an 2002 hs?
But.....it would surely work for 2002 GS. Same oem bumper from 98-02.
af1c331 Looks like this project is going to be a little more complicated and costly than I was hoping. The bulbs are VERY different in size. Thanks for the input!
I will try to see if the HIDs will fit the fixture this weekend.
Yeah, just the fixture is $70-$80 add $60 for two cheap sets of HID's or more. It will set you back $130 for the cheapest route or $150 if you buy the relay and what not.
11-14-12, 09:43 PM
#34
Pole Position
Thread Starter
iTrader: (8)
Join Date: Oct 2012
Location: Ca
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Lazy This mod is next on my list! I only want the cover tho.. Retrofit 2 projectors in it so I don't blind ppl n light up all lanes on the freeway haha
11-14-12, 09:44 PM
#35
any close up pics with the lights off? i want to see how clean the fitment is and that there is no gaps...i dont think there would be any given that you must heat the bumper up . i am thinking of buying these and then giving it to my body shop to mold it in so it is completly flush.....????? and 2 sets of hids/projects fo sho.
has any one found the set with 2 CLEAR LENSES----NON HALO?
thanks
has any one found the set with 2 CLEAR LENSES----NON HALO?
thanks
11-15-12, 03:53 PM
#36
any close up pics with the lights off? i want to see how clean the fitment is and that there is no gaps...i dont think there would be any given that you must heat the bumper up . i am thinking of buying these and then giving it to my body shop to mold it in so it is completly flush.....????? and 2 sets of hids/projects fo sho.
has any one found the set with 2 CLEAR LENSES----NON HALO?
thanks
has any one found the set with 2 CLEAR LENSES----NON HALO?
thanks
11-15-12, 04:45 PM
#37
Nice write up bro! Doing this soon!! One question though, on your wiring, i see you have a separate switch to flip the fog lights on? Couldn't you wire it to the oem and use the stick switch by the steering wheel? Unless that ebay harness you linked on your diagram will do that with "slight" wire hacking...
11-16-12, 01:43 AM
#39
Pole Position
Thread Starter
iTrader: (8)
Join Date: Oct 2012
Location: Ca
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Nice write up bro! Doing this soon!! One question though, on your wiring, i see you have a separate switch to flip the fog lights on? Couldn't you wire it to the oem and use the stick switch by the steering wheel? Unless that ebay harness you linked on your diagram will do that with "slight" wire hacking...
Yesterday 03:53 PM
Yesterday 03:53 PM
[/QUOTE]TTurboPimp what lip is that you have on that bumper?
[/quote]
Knock off TTE lip off eBay.
11-16-12, 09:09 AM
#41
Pole Position
Thread Starter
iTrader: (8)
Join Date: Oct 2012
Location: Ca
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
any close up pics with the lights off? i want to see how clean the fitment is and that there is no gaps...i dont think there would be any given that you must heat the bumper up . i am thinking of buying these and then giving it to my body shop to mold it in so it is completly flush.....????? and 2 sets of hids/projects fo sho.
the bumper did take the shape of the fixture. the body shop would do a better jo,b and can fill in the spots with filler.
Quote:
has any one found the set with 2 CLEAR LENSES----NON HALO?
same question here, all I see is the one with the one blue lense
has any one found the set with 2 CLEAR LENSES----NON HALO?
same question here, all I see is the one with the one blue lense
