DIY oil pan gasket?
#32
Pole Position
iTrader: (12)
http://www.autopartsexpress.com/item...ELPRO&weight=1
BUMP. Do I need to buy this for when I drop the lower oil pan? Or do I just buy the FIPG stuff? Thanks guys.
BUMP. Do I need to buy this for when I drop the lower oil pan? Or do I just buy the FIPG stuff? Thanks guys.
#36
Pole Position
iTrader: (12)
What can I substitute FIPG with? Anything at autozone I can get thats really good? I dont mind spending an extra buck at autozone if it saves me money compared to a Toyota/Lexus dealer. Thanks again guys.
Found this on ebay..
http://compare.ebay.com/like/3308756...Types&var=sbar
Looks like a good deal I think. Anyone agree?
Found this on ebay..
http://compare.ebay.com/like/3308756...Types&var=sbar
Looks like a good deal I think. Anyone agree?
Last edited by ashtray; 03-07-13 at 01:37 PM.
#40
Driver School Candidate
Join Date: Aug 2010
Location: TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#42
Driver School Candidate
Join Date: Aug 2012
Location: Maine
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
i dont know if this is where i should post this but anyone know how to get a new lower oil pan for the 99 gs400? my threads on my drain plug finally went and i know retapping it is only a temporary solution.
#43
Driver School Candidate
Join Date: Aug 2010
Location: TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
So no one has figured out how to remove the back 6 bolts of the oil pan without lifting the motor? I could easily do this DIY if I has instructions on how to remove the back 6 bolts. Anyone?
#45
Advanced
Anyone that has replaced their oil pan gasket (not transmission pan) please chime in. I developed a leak that appears to be coming from my oil pan gaskets. Valve cover gaskets are new no leaks, cam seal and crank seal are all new, vvti pulley is brand new also so I know these parts listed aren't leaking. Is it best to raise the engine or remove the cross member?
The car is a 99 GS300 232K miles.
Any help is appreciated.
The car is a 99 GS300 232K miles.
Any help is appreciated.
Last edited by wbmx1981; 07-12-14 at 01:48 PM.