trailing arm bushing???
#3
Driver
Thread Starter
iTrader: (4)
Join Date: Dec 2010
Location: al
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
ive been searching for two days and only seem to find the lower bushings, or upper or for older models…. i thought someone might have some insight with the back order of the dazien castor bushings….
by the way, Yes is the answer to your question… i am hoping for some help, i have done my do diligence with no success, so im asking for help….. people help each other is what i see on this forum the most , people helping people… its a nice way to live!
by the way, Yes is the answer to your question… i am hoping for some help, i have done my do diligence with no success, so im asking for help….. people help each other is what i see on this forum the most , people helping people… its a nice way to live!
Trending Topics
#8
Lexus Fanatic
iTrader: (182)
Just kidding. http://www.l-tunedparts.com/product/?id=3297
$50 for one bushing or waiting on the daizen kit with ALL the bushings for like $115
#10
Northern California Regional Officer
iTrader: (5)
And as I mentioned above, the non-Daizen parts available are not a complete kit. I can just imagine noobs getting replacing only 2 of the 8 bushings thinking they have what they need, then we'll see posts about "I've changed bushings but still got the shakes, what else?" then people will say, change ball joints, road force-balance rims, yada, yada, spend more time and money fixing things that may not be causing the problem and then at some point it will be like "Oh, you only changed 2 bushings?, you should of replaced all the bushings" = FAIL.
Last edited by RMMGS4; 12-21-10 at 01:29 PM.
#11
Also look for ADUS bushings....there is a good website
check out www.mybushings.com also http://www.toyheadauto.com/Performan...1990_to_111994
the second one is best
good luck!
dd
the second one is best
good luck!
dd
#12
Lexus Fanatic
iTrader: (182)
Yup: 2 bushings for $100 vs. 8 bushings for $115
And as I mentioned above, the non-Daizen parts available are not a complete kit. I can just imagine noobs getting replacing only 2 of the 8 bushings thinking they have what they need, then we'll see posts about "I've changed bushings but still got the shakes, what else?" then people will say, change ball joints, road force-balance rims, yada, yada, spend more time and money fixing things that may not be causing the problem and then at some point it will be like "Oh, you only changed 2 bushings?, you should of replaced all the bushings" = FAIL.
And as I mentioned above, the non-Daizen parts available are not a complete kit. I can just imagine noobs getting replacing only 2 of the 8 bushings thinking they have what they need, then we'll see posts about "I've changed bushings but still got the shakes, what else?" then people will say, change ball joints, road force-balance rims, yada, yada, spend more time and money fixing things that may not be causing the problem and then at some point it will be like "Oh, you only changed 2 bushings?, you should of replaced all the bushings" = FAIL.
#13
Driver
Thread Starter
iTrader: (4)
Join Date: Dec 2010
Location: al
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
wow... some just post to post! thanks for the help for the ones that were helping. i found the LAST two that i needed to go with the arms, ball joints, tie rod ends, steering and sway. along with brakes and rotors while its apart. thanks again and Merry Christmas!!
Thread
Thread Starter
Forum
Replies
Last Post
bentleymp2
Suspension and Brakes
3
01-08-16 09:28 AM