Wheel width/offset/size and tire fitment Q&A thread
#766
Lead Lap
iTrader: (2)
Hey V8addict your 19x9.5 +15 in the front is good, but your 10.5 +15 in the rear will poke out a tad, but if you lower it, it will be flush. 10.5+22 will scrape the inside lip of your fender. (This is all assuming you ha e stock fenders). So you will need to shave and roll, and adjust stock camber for more -camber to make your rears work. Let us k ow how it works for you
#767
Pole Position
iTrader: (1)
Join Date: Mar 2013
Location: CA
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
I just ordered a set of Enkei Raijin 18x9.5 +35 all around
Planning to run either 265/35 all around or 265/35 front 285/30 rear
I know the 265 on the rear would be no issue, but I am wondering if anybody had any insight on a 265 front/285 rear with those specs & rolled fronts, shaved rears.
I think it's possible, but I've mainly dealt with stretch. Also I won't be very low with these, but not monster truck height either. BC 14/12k
Planning to run either 265/35 all around or 265/35 front 285/30 rear
I know the 265 on the rear would be no issue, but I am wondering if anybody had any insight on a 265 front/285 rear with those specs & rolled fronts, shaved rears.
I think it's possible, but I've mainly dealt with stretch. Also I won't be very low with these, but not monster truck height either. BC 14/12k
Last edited by Danny365N; 03-17-15 at 01:36 AM.
#768
5% Club. Killing it!!!
iTrader: (15)
I just ordered a set of Enkei Raijin 18x9.5 +35 all around
Planning to run either 265/35 all around or 265/35 front 285/30 rear
I know the 265 on the rear would be no issue, but I am wondering if anybody had any insight on a 265 front/285 rear with those specs & rolled fronts, shaved rears.
I think it's possible, but I've mainly dealt with stretch. Also I won't be very low with these, but not monster truck height either. BC 14/12k
Planning to run either 265/35 all around or 265/35 front 285/30 rear
I know the 265 on the rear would be no issue, but I am wondering if anybody had any insight on a 265 front/285 rear with those specs & rolled fronts, shaved rears.
I think it's possible, but I've mainly dealt with stretch. Also I won't be very low with these, but not monster truck height either. BC 14/12k
#777
Pole Position
iTrader: (1)
Join Date: Mar 2013
Location: CA
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
I read through most of the pages, but couldn't find anything related. Everyone seems to run stretch/flush lol
Think I'll be able to run 18x9.5 +35 with a 265/35 on the front @ a reasonable height, probably top height on BCs?
I might go with 255 or 265 fronts & 285 rears, plan to take it to some for-fun track days.
Think I'll be able to run 18x9.5 +35 with a 265/35 on the front @ a reasonable height, probably top height on BCs?
I might go with 255 or 265 fronts & 285 rears, plan to take it to some for-fun track days.
Last edited by Danny365N; 03-18-15 at 01:51 AM.
#778
Just picked up a set of wheels, HRE 565c forged 3 piece specs are 20x10+25 front 20x11+25 rear,I'm on stock body stock fender 2gs,will these fit without modification for now?I plan on lowering springs eventually,I just want a nice conservative drop nothing too crazy so no coilovers yet,what tire size would you guys recommend for this setup? Thank you on advance for the help
#779
Driver School Candidate
iTrader: (1)
Join Date: May 2013
Location: CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
bought some 19.8.5 +44 all around and had them re lipped to 19x9.5 in front and 19x10in rear, trying to figure out what size tires are best for front and rear (no fat set Up). currenty on Tein coilovers and ajustable front upper camber arms, no rear camber kit. as far as it looks im going to have to shave the rears and roll the front.
Last edited by vlpz760; 04-19-15 at 12:30 PM.