celm

iTrader: (1)

This is the set up on my Aristo

Ft 20x8.5 +40 245/30/20
RR 20x10 +40 285/25/20
lowered on RS-R coilovers

NO rubbing what so ever

abounly

iTrader: (27)

I'm 9.5 +5 and 10.5 +5. I have a friend that is in the negative double digits on his gs.

Justin2JZ

Hey guys what's the widest low offset setup I can go without modding my fenders? I'll be glad to add camber to compensate. My last setup was 19x10.5 +22 and I just dialed out my camber to about -3.1 and they fit perfect.

celm

iTrader: (1)

I think once u go under 30 for an offset u have to mod the fenders

Justin2JZ

Alright lol let's forget about low offset what's the widest possible wheel setup leaving the fenders stock? They're rolled obviously.

celm

iTrader: (1)

Look at my set , i have no rubbing and didnt have to touch the fenders or roll the fenders and my car is lowered also

Justin2JZ

My previous setup was wider than yours I'm trying to see how much wider than 10.5 I can go. I'm thinking probably 11.5 with a considerable amount of camber.

abounly

iTrader: (27)

Depending on your offset and how much camber you can run. I say 11.5 +17/+20?

VINCE9164

iTrader: (14)

Roll front / shave rears with

19x9 +27 245/40
19x10 +32 255/40?

Are the fender mods needed or can I get away rolling the front without having any dimples? This is for a dd. Thanks

ryceboy

iTrader: (2)

Anyone running the following???

19x9.5 +26
19x10.5 +26

If so...got any pix??? Thanks!

antmck33

iTrader: (1)

Hi guys,

I'm planning on getting a used set of wheels from a 350zx I believe. They're 19" 8.5 ET35 with 235/35/19 front and 19" 9.5 ET 40 265/30/19 rear.

I believe that 350zx have hub bore of 66.1 and GS needs 60.1 so I'm expecting to have to get some hub centric rings for a smooth ride, my question is purely, as being a novice, can anyone see anything I may be missing.

Also, as a side question, if I were to fit spacers should I want/need them, would spacers with 66.1/60.1 bores adaption be something that is available or would I just have to get 66.1/66.1 and just use the hub centric rings?

Again, apologies if it all sounds obvious as I am learning all this as I go!?!

1SickGS300

What mods would need to be done to my fenders if i order this size? and is this a decent fit? 19x9.5 offset*+3 114.3*5h and 19x10.5 offset*+3

1SICKGS400

just put these on my car few days ago 19x10.5 rear 19x9.5 front +20mm offset 245/35/19 235/35/19 debating on lowering car more but ride is like a dream with the big wheels and also getting wheels sprayed matte black

1SickGS300

What mods would need to be done to my fenders if i order this size? and is this a decent fit? 19x9.5 offset*+3 114.3*5h and 19x10.5 offset*+3

seivonecsu

iTrader: (7)

what offsets for 20x10 all around to get pretty flush and clear front suspension gonna be running 225/35 in front and 245/35 in rear...... don't want the rims to poke trying to avoid fender pulling..... thinking 25mm up front and 20mm in rear but keep second guessing myself.....