Pre-cut Red Taillight tint/vinyl
#4
painting them gives it a clean look.
Procedure:
1st: candy apple red spray paint, tape off the brake area and reverse, two coats over the amber area.
2nd: untape the brake area, and one coat over the whole assembly (keep the reverse taped).
3rd: let it dry, and peel the tape off the reverse, then clear coat the whole assembly.
if you want of course....
Procedure:
1st: candy apple red spray paint, tape off the brake area and reverse, two coats over the amber area.
2nd: untape the brake area, and one coat over the whole assembly (keep the reverse taped).
3rd: let it dry, and peel the tape off the reverse, then clear coat the whole assembly.
if you want of course....
#6
Retired
iTrader: (32)
i used the aerotect one and it was like OEM.
before- http://i254.photobucket.com/albums/h...DSC00294-1.jpg
after- http://i254.photobucket.com/albums/h...g/IMG_0050.jpg
before- http://i254.photobucket.com/albums/h...DSC00294-1.jpg
after- http://i254.photobucket.com/albums/h...g/IMG_0050.jpg
#7
Advanced
iTrader: (2)
i used the aerotect one and it was like OEM.
before- http://i254.photobucket.com/albums/h...DSC00294-1.jpg
after- http://i254.photobucket.com/albums/h...g/IMG_0050.jpg
before- http://i254.photobucket.com/albums/h...DSC00294-1.jpg
after- http://i254.photobucket.com/albums/h...g/IMG_0050.jpg
Day and night difference!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rymag
GS - 2nd Gen (1998-2005)
13
02-09-12 09:11 PM