What to use to stick 'L' emblem on steering wheel
#1
What to use to stick 'L' emblem on steering wheel
I have a '00 GS which does not have a chrome lexus emblem on the wheel, BUT I found one on ebay that fits over the molded 'L' on the wheel label.
What suggestions for keeping it on there? tape won't work due to size of the emblem. Crazy Glue?
What suggestions for keeping it on there? tape won't work due to size of the emblem. Crazy Glue?
#5
The One
iTrader: (3)
I wouldn't do it. I have not been in a severe enough accident where the airbag deployed so I don't know where the cover will separate. If it is not held down well enough, the emblem can become a potential flying projectile. I would also hate for the emblem to somehow impede the functionality of the airbag.
#7
I wouldn't do it. I have not been in a severe enough accident where the airbag deployed so I don't know where the cover will separate. If it is not held down well enough, the emblem can become a potential flying projectile. I would also hate for the emblem to somehow impede the functionality of the airbag.
Trending Topics
#12
JB Weld. I know it sounds crazy, but if you don't want it coming off in an accident, that'd be your best bet.
Or just some nice 3M double sided, and live with the 2 mm gap you'll have.
Or just some nice 3M double sided, and live with the 2 mm gap you'll have.
#13
The One
iTrader: (3)
I assume you know what your airbag looks like. Here are the newer ones for reference. I borrowed it from another thread.
The airbag should come apart around the plastic center. No flying projectile.
#15
5% Club. Killing it!!!
iTrader: (15)
Yes, and to the OP the ones from ebay don't fit properly even with the double sided tape..
I bought two different ones and they were both shiat.. I guess my advice would be to get a upgraded steering wheel.. Those ebay sellers are shady...
I bought two different ones and they were both shiat.. I guess my advice would be to get a upgraded steering wheel.. Those ebay sellers are shady...
Last edited by tmf2004; 12-05-09 at 11:19 PM.