interior led lights - Page 2

feras430 · 10-20-09, 12:15 PM

they just send me back, they don't know. but i'll look more and see if i get more info.

GS4_CS · 10-27-09, 11:05 PM

Did those which im pretty sure are t3's, but I still need to do the four below that which look like this

and here are the other ones

I took out my mirror switch the other day and I noticed that it also has a replaceable bulb which appears to be a t3. Im going to pull my door panels off and see if all the door/window switches have removable bulbs as well.

sakataj · 10-28-09, 12:20 PM

Quote:

Originally Posted by GS4_CS

Did those which im pretty sure are t3's, but I still need to do the four below that which look like this

and here are the other ones

I took out my mirror switch the other day and I noticed that it also has a replaceable bulb which appears to be a t3. Im going to pull my door panels off and see if all the door/window switches have removable bulbs as well.

where did u get your led's? the tape player are soldered in so i assumed the nav was to, guess i shoulda checked both.

2jzism · 10-28-09, 06:53 PM

Quote:

Originally Posted by sakataj

where did u get your led's? the tape player are soldered in so i assumed the nav was to, guess i shoulda checked both.

The green based bulbs are called "NEO WEDGE" bulbs. I got mine HERE and HERE

a#'z · 10-28-09, 01:57 AM

This is a great diy, thanks a lot. imma change mines to LED myself

GS4_CS · 10-28-09, 04:40 PM

I got mine from warden on ebay, but I think my next few will be from v-leds. I think with just about any led its hit or miss. One of mine from warden flickers from time to time and one of my drl led's from v-leds is sometimes dim.

LudeNsoL · 10-28-09, 07:12 PM

Just ordered some from V-LEDS..... Hopefully I ordered enough.

a#'z · 10-28-09, 09:01 PM

Does anyone know how to change the climate bulbs, the one when you click on it, (the green ones) not the t3's, but the ones u click on...

sakataj · 10-29-09, 10:15 AM

Quote:

Originally Posted by GS4_CS

I got mine from warden on ebay, but I think my next few will be from v-leds. I think with just about any led its hit or miss. One of mine from warden flickers from time to time and one of my drl led's from v-leds is sometimes dim.

yeah i dont care for wardens bulbs after using some. i bought his t3's t4's and t5's and they are all dim. but one of my v-led bulbs in my center console went out last night

so AGAIN i have pulled my center console. i have one bulb in my license plate that KEEPS dying from v-led so now i have purchased some of these

(they are JDM altezza or is300 license plate lights and come with 3 leds per side, just hope they bright enough for me)

Quote:

Originally Posted by 2jzism

The green based bulbs are called "NEO WEDGE" bulbs. I got mine HERE and HERE

also called t-3 or t-4 bulbs would have to see the bottom to see which one it is. any pics of how bright yours are?

Quote:

Originally Posted by LudeNsoL

Just ordered some from V-LEDS..... Hopefully I ordered enough.

can always order more if needed

Quote:

Originally Posted by a#'z

Does anyone know how to change the climate bulbs, the one when you click on it, (the green ones) not the t3's, but the ones u click on...

think those are t-3 bulbs actually again would need to see the bottom of them

LudeNsoL · 10-29-09, 10:31 AM

nice license plate idea i want to make my plate brighter 2

sakataj · 10-29-09, 10:47 AM

Quote:

Originally Posted by LudeNsoL

nice license plate idea i want to make my plate brighter 2

thanks but actually got the idea when i met tony in Atlanta, he has them already
i have gone through 4 different sets and none bright enough for me. so chado (while he's in japan) is picking me up a set. u can probably get him to get you one....he's leaving in a few days

LudeNsoL · 10-29-09, 02:46 PM

na thanks i was probaly going to just get some cold cathode tubes

LudeNsoL · 11-04-09, 05:42 PM

okay just did the climate and it came out nice... the climate control is 7-8 t4 bulbs...

LudeNsoL · 11-04-09, 07:22 PM

okay i did the radio display and came out real good. now i have a question i tried taking the whole board where the buttons are. but it won't come out. how do i take it out. i already did the screen now all i need to do is the buttons on the radio. thanks...

kosi718 · 11-04-09, 08:22 PM

okay Ive been wondering this for the longest...

I did this on my Old LS and was wondering if the process is as easy on the GS as it was on my LS.... they seem to use the same twist lock bulbs

THIS is the procedure I used... well atleast the bulbs and the type.

http://www.lexls.com/tutorials/light...klighting.html

SOOOO I wanted to know IF its as simple as twisting out and twisting in some bulbs like it was for the LS

I honestly can tell you, I am not all for this soldering and getting resistors and ETC that a lot of these other guys do to get super bright climate controls.

Im also not trying to change the LED's on the button controls either... just the back lighting...

Ive been wanting to know this for THE longest.