Who is rollin' hard on 18's?! Lets see some pics please.
#481
need some help. I am looking at a set of wheels and looking for which specs will work
18x9.5 et22 or et30 for the front
and for the rear
18x10.5 et22 or et15 for the rear.
I want it to be flush but nothing crazy. Anyone have an idea of what I can run?
18x9.5 et22 or et30 for the front
and for the rear
18x10.5 et22 or et15 for the rear.
I want it to be flush but nothing crazy. Anyone have an idea of what I can run?
#483
Lead Lap
iTrader: (3)
i posted this in another thread that was relevant but thought i might have better luck here with my slammed brethren....
anybody else slammed with shaved or rolled fenders running into flappin fender liners? I've rubbed through, trimmed out, massaged and reformed with a heat gun the problematic areas but still running into these fender liners hanging down. Thanks in advance fellas!
link to the other old thread
https://www.clublexus.com/forums/cl-...#ixzz3WNo3e1wN
anybody else slammed with shaved or rolled fenders running into flappin fender liners? I've rubbed through, trimmed out, massaged and reformed with a heat gun the problematic areas but still running into these fender liners hanging down. Thanks in advance fellas!
link to the other old thread
https://www.clublexus.com/forums/cl-...#ixzz3WNo3e1wN
#486
Lexus Test Driver
iTrader: (16)
Join Date: Dec 2012
Location: FL, UK & Deutschland
Posts: 1,149
Likes: 0
Received 0 Likes
on
0 Posts
No problem bro. I kept the skid plate for a while until it just kept losing the screws to hold it in. I'll probably replace it eventually but as of now I haven't had any issues with it not being there.
#487
Lead Lap
iTrader: (3)
Thanks bro! Yeah, lol mine got pretty mangled, lol. Had to pull over and make an emergency surgery on it cut out over 1/2 of it and zip tie up the remaining scrap pieces. It was sliding all over the place! Not too cool driving around with that thing sliding around. Funny now looking back at it =) Thanks again North!