heat gun method no work on the fender lining =(
03-07-09, 09:41 PM
#1
Pole Position
Thread Starter
iTrader: (7)
Join Date: Feb 2007
Location: Tx
Posts: 2,265
Likes: 0
Received 0 Likes
on
0 Posts
heat gun method no work on the fender lining =(
damnit. 
it was just mild rub before but now its got worse 
i heated the areas that showed signs of rubbing and pushed it back with a bat. now it just rubs either way i turn my wheels.
well i on a positive note i did finally paint my calipers black and put the lexus decals on. they look really sweet on the car! but the rubbing is still annoying me
any advice guys?
it was just mild rub before but now its got worse i heated the areas that showed signs of rubbing and pushed it back with a bat. now it just rubs either way i turn my wheels. well i on a positive note i did finally paint my calipers black and put the lexus decals on. they look really sweet on the car! but the rubbing is still annoying me
any advice guys?
03-07-09, 09:50 PM
#2
Lexus Champion
... inner fender plastic lining? just take is off. lol I did.
the fender edge use heat gun to prevent paint crack... but I'm gonna cut them..... someday when I see it start on rusting....
the fender edge use heat gun to prevent paint crack... but I'm gonna cut them..... someday when I see it start on rusting....
03-07-09, 10:33 PM
#4
Lexus Champion
.. on the driver side, there's about 2 wires you have to zip tie them up so they don't make contact with the tire in any way possible, zip tie the front inner fender and wires so it doesn't fall off or be loose and contact the wheel, then spray undercoating if you want to prevent rusting... That's about it...
Oh and the beeper for you alarm is behind the inner fender too, so if you have snow build up there in winter, you might not hear it....
Oh and the beeper for you alarm is behind the inner fender too, so if you have snow build up there in winter, you might not hear it....
03-08-09, 01:57 PM
#7
Lexus Test Driver
iTrader: (1)
Join Date: Dec 2006
Location: NJ
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
I had to take mine off, but will be reinstallling them. Just cut the area where it is rubbing. Any of you guys that took the fender liners off have the driver side by any chance??
Trending Topics
03-10-09, 02:55 PM
#8
HAHA Mine just flew out! got 20's & lowered about 2 inches , rubbed alot when i first lowered it , been meaning to take it off -- too lazy--- however doin about 125 on the freeway i heard the nonstop scraping before i could come to a complete stop i saw the liner in the rearview mirror , really messd up my fenders too, so take care of it asap before its too late -- now she's just Buck naked down there- see eveything !
Thread
Thread Starter
Forum
Replies
Last Post
