How to programe the remote on 02 GS430
02-25-08, 08:48 AM
#1
Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: CA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
How to programe the remote on 02 GS430
Is any body know how to programe a new remote on the 2002 GS430. I purchase a used remote on the ebay. Need instructions! Thanks
02-25-08, 04:10 PM
#2
See this link.. I think this is what you want.
https://www.clublexus.com/forums/sho...ramming+remote
This should help.. my wife made fun and asked if she need to run around the car three times to get it to work.. ha ha ...
BP
https://www.clublexus.com/forums/sho...ramming+remote
This should help.. my wife made fun and asked if she need to run around the car three times to get it to work.. ha ha ...
BP
02-25-08, 10:18 PM
#3
Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: CA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
I try this method two times. at the begining, everything like what he descripe. except the last step when i press the lock button. The door will not unlock. I guess this method will not fit my car.
02-25-08, 11:48 PM
#4
Driver
iTrader: (3)
Join Date: Mar 2007
Location: WA
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
These are the correct instructions:
Remote Programming
1. Open driver door, keep it open and in the unlocked position (all other doors should be closed)
2. Put original key in ignition and pull out
3. Lock and Unlock the doors 5 times (complete each lock/unlock cycle within 1 second and
entire process in 40 seconds or less)
4. Close the door and open the door
5. Lock and Unlock the doors another 5 times (complete each lock/unlock cycle within 1 second and
entire process in 40 seconds or less)
6. Put the key in the ignition, turn it to "on" and then off (with 1 second) and remove from the ignition.
7. Press and hold transmitter LOCK and UNLOCK buttons simultaneously for at least 1.5 seconds,
and then within 3 seconds; press any transmitter button for at least one second.
8. If within 3 seconds, door locks cycle one time, new transmitter code was accepted. If door locks
cycle 2 times, new transmitter code was not accepted. If code was not accepted retry step 8 again.
06-25-08, 04:48 PM
#6
Driver
Join Date: Jan 2007
Location: MD
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Because those are the wrong instructions (similar, but different towards the end).
These are the correct instructions:
Remote Programming
1. Open driver door, keep it open and in the unlocked position (all other doors should be closed)
2. Put original key in ignition and pull out
3. Lock and Unlock the doors 5 times (complete each lock/unlock cycle within 1 second and
entire process in 40 seconds or less)
4. Close the door and open the door
5. Lock and Unlock the doors another 5 times (complete each lock/unlock cycle within 1 second and
entire process in 40 seconds or less)
6. Put the key in the ignition, turn it to "on" and then off (with 1 second) and remove from the ignition.
7. Press and hold transmitter LOCK and UNLOCK buttons simultaneously for at least 1.5 seconds,
and then within 3 seconds; press any transmitter button for at least one second.
8. If within 3 seconds, door locks cycle one time, new transmitter code was accepted. If door locks
cycle 2 times, new transmitter code was not accepted. If code was not accepted retry step 8 again.
These are the correct instructions:
Remote Programming
1. Open driver door, keep it open and in the unlocked position (all other doors should be closed)
2. Put original key in ignition and pull out
3. Lock and Unlock the doors 5 times (complete each lock/unlock cycle within 1 second and
entire process in 40 seconds or less)
4. Close the door and open the door
5. Lock and Unlock the doors another 5 times (complete each lock/unlock cycle within 1 second and
entire process in 40 seconds or less)
6. Put the key in the ignition, turn it to "on" and then off (with 1 second) and remove from the ignition.
7. Press and hold transmitter LOCK and UNLOCK buttons simultaneously for at least 1.5 seconds,
and then within 3 seconds; press any transmitter button for at least one second.
8. If within 3 seconds, door locks cycle one time, new transmitter code was accepted. If door locks
cycle 2 times, new transmitter code was not accepted. If code was not accepted retry step 8 again.
see here for proper instructions: https://www.clublexus.com/forums/sho...83&postcount=8
Thread
Thread Starter
Forum
Replies
Last Post
