Go Back   Club Lexus Forums > Lexus Model Forums > GS Models > GS - Second Generation
Sign in using an external account
Register Forgot Password?

alternator replacement how-to?

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 08-27-09, 01:17 PM   #16
sakataj
Lexus Fanatic
Trader Score: (171)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 15,413
Sakataj
Send a message via Yahoo to sakataj
Default

Quote:
Originally Posted by kingkirby View Post
i took off the bolts and wires to the alternator (90 min) im newB. and then i couldnt find a hole big enuff to slide it out. so i yanked and cranked it out. it was frustrating. im going to napa today to get a new alternator. i think i might have trouble fitting it back in the hole i pulled it from. and also there was a leak dripping onto the alternator. i read up on it and some said it was the power steering fluid. will lucas power steering stop leak stop a leak in a hose?
i think the older models did have a issue with power steering dripping onto thr alternator but its been awhile since i recall hearing about it
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!
__________________


FOR ALL YOU LOWBALLERS THIS IS HOW I FEEL:
http://www.modified.com/editors/modp...ors/index.html
sakataj is offline   Reply With Quote
Old 09-03-09, 01:58 PM   #17
maintrain
Pole Position
Trader Score: (1)
 
maintrain's Avatar
 
Join Date: Jun 2004
Location: Georgia
Posts: 293
Default

Quote:
Originally Posted by kingkirby View Post
i took off the bolts and wires to the alternator (90 min) im newB. and then i couldnt find a hole big enuff to slide it out. so i yanked and cranked it out. it was frustrating. im going to napa today to get a new alternator. i think i might have trouble fitting it back in the hole i pulled it from. and also there was a leak dripping onto the alternator. i read up on it and some said it was the power steering fluid. will lucas power steering stop leak stop a leak in a hose?
I had 2 alternators die from a leaky ps pump. In my case, the stop leak didn't work so I had to replace the ps pump. It's not cheap so I found a used one. No more alternator issues to date.
__________________
http://i47.photobucket.com/albums/f1.../maintrain.jpg
98 GS400 over 200000 miles and still going strong!!! All options except Nav

K&N FIPK Intake, L-Sportline springs, KYB GR-2 Struts, ADR-79 BATTLE EXE wheels 18x8.5 fr 18x9.5 r 245/40/18 fr 265/35/18 r, Royal Purple, Amsoil Univ Syn ATF. Borla 11729 Rear Section.
maintrain is offline   Reply With Quote
Old 04-28-11, 02:36 PM   #18
DRELOC
Driver
Trader Score: (3)
 
Join Date: Jan 2010
Location: CA
Posts: 166
Default

Old thread but i just replaced the alt about 3 days ago which was a PITA at first then i realized it's not so bad after all if you have patience and think everything thoroughly. Here's a tip on removing the bolt from the PS pulley without a holding tool or SST. Don't remove the serpentine belt while loosening the bolt but if you did already just put like a 5inch socket extension thru the pulley hole and wedge it between the PS pump. The bolt is not torque really tight just need a 1/4 of a turn with your 3/8 breaker bar and it's off. Now to take the pulley off is tricky because if it's rusted on there you might wanna soak it with PB blaster for a while and use a ballpeene hammer and tap & turn it a couple of times from behind to loosen it up since the pulley it's only friction fit. In my case i rented a 3 jaw pulley remover from Autozone(part no. 27078) and you have to remove your radiator fan to fit the puller. I wanna thanked GSteg for answering my pm's and helping me out. Thanks buddy . I hope this will help DIYer out there and save money on labor.
__________________
2000 Black Onyx GS300 R.I.P
2000 Crystal White GS400
DRELOC is offline   Reply With Quote
Old 10-13-11, 09:20 PM   #19
77i9
Lead Lap
Trader Score: (13)
 
Join Date: Aug 2009
Location: Yokohama, Japan
Posts: 401
Default

I just removed my alternator today and this thread was very helpful in the process. To remove the PS pulley I used a pry bar which I placed between the pulley and the pump. I tapped it lightly with a rubber mallet. I tapped, turned, tapped, and turned until I was able to wiggle the pulley loose. I removed the alternator thru the front, just had to push a ps line out of the way a little.
I will be replacing the alt with a remanufactured OE that's gonna cost me $90 with core turn in. I think it's a pretty good deal.
I don't think installation will be any harder than the removal. Wish me luck!
77i9 is offline   Reply With Quote
Old 10-14-11, 03:42 AM   #20
DRELOC
Driver
Trader Score: (3)
 
Join Date: Jan 2010
Location: CA
Posts: 166
Default

I used the pry bar method but the damn pulley still won't come off so i used the jaw in the end. I wonder if we have to take the alternator off again in order to remove the PS pump?
__________________
2000 Black Onyx GS300 R.I.P
2000 Crystal White GS400
DRELOC is offline   Reply With Quote
Old 10-14-11, 04:34 PM   #21
Gunnut
Pole Position
Trader Score: (0)
 
Join Date: Jan 2007
Location: KS
Posts: 305
Default

Maybe a stupid question but.....
How much of the remove and replace is done from the underside of the motor and how much from up top?
If a lot has to be done from underneath I'll probably use a buddy's pit for the job.
Gunnut is offline   Reply With Quote
Old 10-14-11, 06:13 PM   #22
77i9
Lead Lap
Trader Score: (13)
 
Join Date: Aug 2009
Location: Yokohama, Japan
Posts: 401
Default

I removed the serpentine belt and the ps pulley from the top. Everything else was done from under the car.
77i9 is offline   Reply With Quote
Old 10-14-11, 07:10 PM   #23
Gunnut
Pole Position
Trader Score: (0)
 
Join Date: Jan 2007
Location: KS
Posts: 305
Default

Quote:
Originally Posted by 77i9 View Post
I removed the serpentine belt and the ps pulley from the top. Everything else was done from under the car.
Thanks.
JimA
Gunnut is offline   Reply With Quote
Old 10-22-11, 06:52 PM   #24
Gunnut
Pole Position
Trader Score: (0)
 
Join Date: Jan 2007
Location: KS
Posts: 305
Default

Changed mine out today. Not as difficult as I imagined it would be. Only took about an hour start to finish.
Gunnut is offline   Reply With Quote
Old 11-08-11, 04:45 AM   #25
asia615
Driver School Candidate
Trader Score: (0)
 
Join Date: Dec 2007
Location: tn
Posts: 16
Default

Just changed mine out yesterday. I used the PDF files provided and they were very helpful. Seems to have a leaky PS from somewhere. Also only when the car is in drive, i've started getting some loud idle noise.
asia615 is offline   Reply With Quote
Old 10-09-12, 07:18 PM   #26
krispl
Pole Position
Trader Score: (0)
 
Join Date: May 2009
Location: CA Bay Area
Posts: 218
Default

So it seems like majority of you are getting alternator out through the bottom of car right?
krispl is offline   Reply With Quote
Old 12-01-13, 06:10 PM   #27
lyonkster
Pole Position
Trader Score: (0)
 
Join Date: Dec 2005
Location: ca
Posts: 373
Default

I replaced my alternator today, and have a tip for others. I initially found it nearly impossible to wrestle the alternator out of its location, there was always something in the way - pulleys, hoses, and other components.

The only way I could get it out was by dropping the front sway bar mounts (4 screws total), and lowering the sway bar - then the alternator pretty much fell out onto my face . Would have saved me close to an hour of aggravation if I had done this from the start.
__________________
Leon

'01 GS430, Pearl White
lyonkster is offline   Reply With Quote
Old 05-29-14, 10:44 PM   #28
LexusK
Lexus Test Driver
Trader Score: (11)
 
Join Date: Jun 2008
Location: Texas
Posts: 983
Default

Are you guys replacing your alternators with OEM alternators? Could I just go to a junkyard and pull one off a 2GS or is it better to get a refurbished one?
LexusK is offline   Reply With Quote
Old 05-29-14, 10:44 PM
 
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Approved Vendor info?? theUPSguy Site Suggestions & Problems 1 09-04-13 04:37 PM
sc400 oil change info Uncivilize Performance & Maintenance 0 08-28-11 08:34 AM
Lexus Marketing Plan... djspawn00 The Clubhouse 6 04-01-09 10:03 PM
Lexus Headquarters Contact Info? EBMCS03 Car Chat 4 10-24-06 10:07 AM
I want these rims ....manaray yay or nay enginyr The Tire Rack's Tires, Wheels & Brakes Forum 8 11-17-01 11:27 AM


Tags
02, 120v, 330, 98, alternator, bolt, fuse, gs, gs300, gs400, gs430, lexus, locate, location, replacement, stuck

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

All times are GMT -7. The time now is 05:30 PM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info