GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

What Bulb is needed for Gear Selector/Shifter

Thread Tools
 
Search this Thread
 
Old 02-27-19, 01:09 AM
  #1  
FullTimeX2
Driver School Candidate
Thread Starter
 
FullTimeX2's Avatar
 
Join Date: Jan 2012
Location: NM
Posts: 13
Received 0 Likes on 0 Posts
Default What Bulb is needed for Gear Selector/Shifter

Can anyone advise on what bulb(s) are needed to illuminate the center console gear selector? Part Number?
Mine has burnt out.
Also if anyone knows of a good place to source this bulb it would also be much appreciated!
Thanks in advance.
Old 02-27-19, 04:50 AM
  #2  
sbagdon
Advanced
 
sbagdon's Avatar
 
Join Date: Mar 2016
Location: MI
Posts: 520
Received 33 Likes on 31 Posts
Default

Now curious... is it one gear that's not displaying, or all gears...?

Concern would be that the bulb is soldered, vs. removable.

If it's removable, the best resource would be Lexus... even if they charge $15 for the bulb, you know it'll fit.

Believe this equates to the climate cluster... Lexus changed the bulb (smaller), yet if you buy from them, it includes a spacer to make it fit. Went through that exercise, yet when just searched the original part number, then ordered the super-ceding part, it came with bulb, spacer, and light sleeve, to fit properly.

Next best source would be a pick-and-pull... yet pull all the bulbs you can find... we do, and when the 20yr bulbs burns out, we have a bunch to go back to.
The following users liked this post:
FullTimeX2 (02-27-19)
Old 02-27-19, 07:04 AM
  #3  
Debonair
iModerate
 
Debonair's Avatar
 
Join Date: May 2007
Location: 408 NOR CAL
Posts: 3,397
Received 39 Likes on 27 Posts
Default

99% sure its a #74 bulb with a green rubber condom on it. Available everywhere. Swap the condom over to the new bulb and you're good to go.

Getting to its pretty easy.

Last edited by Debonair; 02-28-19 at 11:01 AM.
The following users liked this post:
FullTimeX2 (02-27-19)
Old 02-27-19, 07:10 AM
  #4  
Debonair
iModerate
 
Debonair's Avatar
 
Join Date: May 2007
Location: 408 NOR CAL
Posts: 3,397
Received 39 Likes on 27 Posts
Default

This post says #37 fits better. It also has some instructions. I searched "shifter bulb" in the 2GS forum to find it.

https://www.clublexus.com/forums/gs-...400-gs300.html
The following users liked this post:
FullTimeX2 (02-27-19)
Old 02-27-19, 08:17 AM
  #5  
FullTimeX2
Driver School Candidate
Thread Starter
 
FullTimeX2's Avatar
 
Join Date: Jan 2012
Location: NM
Posts: 13
Received 0 Likes on 0 Posts
Default

Thanks Debonair,
I am going to order these and see what happens...

not to pricey at all, and if they do not work I can still switch out some of the other bulbs within the car.
Old 02-27-19, 08:19 AM
  #6  
FullTimeX2
Driver School Candidate
Thread Starter
 
FullTimeX2's Avatar
 
Join Date: Jan 2012
Location: NM
Posts: 13
Received 0 Likes on 0 Posts
Default

Thanks for the info sbagdon. Appreciate it.
to answer your question ALL of the lights are out on the gear selector. P D R 3 2 1, all are out.
If the Ebay bulbs do not work I will head over to the Lexus Parts department and order one.

Last edited by FullTimeX2; 02-27-19 at 11:35 AM.
Old 02-27-19, 08:08 PM
  #7  
DosyBoy
Lexus Champion
iTrader: (1)
 
DosyBoy's Avatar
 
Join Date: Sep 2011
Location: PGH
Posts: 2,098
Likes: 0
Received 11 Likes on 9 Posts
Default

Originally Posted by FullTimeX2
Thanks for the info sbagdon. Appreciate it.
to answer your question ALL of the lights are out on the gear selector. P D R 3 2 1, all are out.
If the Ebay bulbs do not work I will head over to the Lexus Parts department and order one.
it's 1 bulb bro and you're done
The following users liked this post:
FullTimeX2 (02-27-19)
Old 02-28-19, 08:22 PM
  #8  
Luxurious
Intermediate
 
Luxurious's Avatar
 
Join Date: Jan 2015
Location: World
Posts: 329
Received 22 Likes on 11 Posts
Default

Let us know what happens with those bulbs. I'm down to order some if they fit. The old color is just so outdated that new LEDs would look pretty awesome. Wish we could LED swap our clusters :/
Old 03-02-19, 12:24 PM
  #9  
n1ck
Driver
 
n1ck's Avatar
 
Join Date: Apr 2014
Location: NJ
Posts: 117
Received 11 Likes on 10 Posts
Default

I used these for the key fob light and the gear selector light:

https://www.superbrightleds.com/more...-car/228/1067/

Old 03-02-19, 04:46 PM
  #10  
sbagdon
Advanced
 
sbagdon's Avatar
 
Join Date: Mar 2016
Location: MI
Posts: 520
Received 33 Likes on 31 Posts
Default

What year is your GS? My '98 doesn't light up the shift selector, and when I pull the shifter trim, there doesn't appear to be a lead for a light... did they offer a lit gear selector in the '98 GS4? Or did someone pull the trim, the light popped out, and no one ever put the light back in? Thx.
Old 03-04-19, 12:31 AM
  #11  
FullTimeX2
Driver School Candidate
Thread Starter
 
FullTimeX2's Avatar
 
Join Date: Jan 2012
Location: NM
Posts: 13
Received 0 Likes on 0 Posts
Default

Got the bulb I ordered installed.
I will go back in and remove the green sleeve off of it, and just go with the white coloring.
While in there I switched out most of the bulbs in the vehicle to white....
N1ck I like the key ring light... mine must be burnt out or the 98 doesn't have it one... I will work on getting that bulb switched out as well.

Sbagdon mine is also a 98 and it does in fact have the gear selector bulb. I attached a picture.


Old 03-04-19, 04:38 PM
  #12  
sbagdon
Advanced
 
sbagdon's Avatar
 
Join Date: Mar 2016
Location: MI
Posts: 520
Received 33 Likes on 31 Posts
Default

Originally Posted by FullTimeX2
Got the bulb I ordered installed.
I will go back in and remove the green sleeve off of it, and just go with the white coloring.
While in there I switched out most of the bulbs in the vehicle to white....
N1ck I like the key ring light... mine must be burnt out or the 98 doesn't have it one... I will work on getting that bulb switched out as well.

Sbagdon mine is also a 98 and it does in fact have the gear selector bulb. I attached a picture.
Thank you!!! When it's above single-digits, see what's broken, and order a new bulb. Thanks!!!
Old 03-04-19, 11:01 PM
  #13  
TW99GS300
Lead Lap
 
TW99GS300's Avatar
 
Join Date: May 2014
Location: WA
Posts: 410
Received 41 Likes on 36 Posts
Default

There's only one bulb in the shifter console, it uses a clear plastic to distribute the light all the way across the entire shifter range.
If you plan on going LED, it's a T-5. Get one with multiple LED on them that faces 3 sides so you can get better coverage
Old 03-05-19, 09:08 AM
  #14  
FullTimeX2
Driver School Candidate
Thread Starter
 
FullTimeX2's Avatar
 
Join Date: Jan 2012
Location: NM
Posts: 13
Received 0 Likes on 0 Posts
Default

Got almost all the bulbs upgraded to LEDs except the vanity mirrors... Also took a minute and switched out the Key ring / ignition light bulb thanks to N1ck...( I have a few more pics to add but Club Lex site is giving me problems uploading pictures, it stops at 90% upload and wont do anything)

Key Ring and gear selector done... I am going to go back in and remove the green sleeve off of the gear selector bulb... go all white...

License plate bulbs done, and finally got the trunk taillight housing swapped out...

Last edited by FullTimeX2; 03-05-19 at 09:29 AM.
Old 03-05-19, 10:39 AM
  #15  
sbagdon
Advanced
 
sbagdon's Avatar
 
Join Date: Mar 2016
Location: MI
Posts: 520
Received 33 Likes on 31 Posts
Default

Originally Posted by FullTimeX2
Got almost all the bulbs upgraded to LEDs except the vanity mirrors... Also took a minute and switched out the Key ring / ignition light bulb thanks to N1ck...( I have a few more pics to add but Club Lex site is giving me problems uploading pictures, it stops at 90% upload and wont do anything)

Key Ring and gear selector done... I am going to go back in and remove the green sleeve off of the gear selector bulb... go all white...

License plate bulbs done, and finally got the trunk taillight housing swapped out...
Those round trunk lenses seem to fade differently... swapped ours out for used/replacements, and upgraded to the later tail lights, with the short turn signals.

Yet the plate light is what really stands out... nice job.

Last edited by sbagdon; 03-05-19 at 01:22 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jj0799
GS - 3rd Gen (2006-2011)
5
03-16-22 11:01 PM
Lukas99GS
GS - 2nd Gen (1998-2005)
5
09-01-15 12:24 PM
PNY
IS F (2008-2014)
14
02-25-13 04:27 PM
LexPaul
ES - 1st to 4th Gen (1990-2006)
14
04-09-12 04:09 PM



Quick Reply: What Bulb is needed for Gear Selector/Shifter



All times are GMT -7. The time now is 10:24 AM.