yea code reader will tell you witch side theres a different code for each side.C0200 is RF
C0205 is LF. I kno i have both lol. Im having codes for both but the left front is reading wheel speed fine. Its weird. anyone had this problem?
I wasn't able to pull the code. I guess I will manually test it. Ah, will finally buy a multimeter.
UPDATE: Well, what do you know, I hit a small bump and the light vanished. I pressed the vsc buttons and it's functioning again. The question:
Did the bump loosen the connection or did the sway loosened it? Both caused by bump. The reason I'm asking this question is because I don't want to switch the sway and end up pinching the line. Ahhh... another weekend, another one on one, with my car. Gotta break of this relationship and buy me a corolla.
Last edited by sam430; 03-28-10 at 11:01 PM..
Sam, your sway bar is upside down lol. It should be a good 2-3 inches away from the ABS sensor if installed the right way. Yes, the sway bar can go in upside down and it will bolt right up, but it will sever both of the abs cables as soon as you hit a bump
__________________ 2008 GS450h Hybrid Power! The new Daily Driver 2005 GS300 GTE VVTi Custom 76mm Billet Wheel Triple BB HKS T51R The 4 Door Race Car...in the making 2002 GS300 Sport Design Graphite Grey Pearl 914rwhp/785ftlb@34psi NA-T Built A650E Kinda Daily Driver E85 Powered 11:1 CR
Please email me instead of PM. I don't always empty the PM, and I don't check it as often.
Email me here and it goes direct to my phone firstname.lastname@example.org