gs300 supercharged
10-11-01, 09:42 PM
#16
Lead Lap
Join Date: Feb 2001
Location: California
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
I came across an article in super street that a TRD supercharger is in the work for the IS. Hmm....I guess us GS3 owner maybe in luck also? Anyone got more detail about this?
10-11-01, 10:37 PM
#18
Driver
Join Date: Feb 2001
Location: So. California
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
AristoV300,
Your car looks good. I am curious where or how you came up with the estimated 350 crank hp? And just to confirm, you say 5.8888 psi? If that is so, great, but I am curious where those figures are from.
Your car looks good. I am curious where or how you came up with the estimated 350 crank hp? And just to confirm, you say 5.8888 psi? If that is so, great, but I am curious where those figures are from.
10-11-01, 10:58 PM
#19
Pole Position
Thread Starter
Join Date: Apr 2001
Location: Torrance, CA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
well the 350 came up as a est. because i was boosting 3 psi when my car dyno at 250 to the wheels. Now i have a smaller pully that gave me almost 6 psi.
5.8 came up because my blitz gauges reads .05
5.8 came up because my blitz gauges reads .05
10-11-01, 11:33 PM
#20
Lexus Champion
if Im not mistaken the supercharger that TRD is going to use is the same supercharger that SRT is making, there going to work with SRT for that supercharger.
but I could be wrrong
but I could be wrrong
10-12-01, 09:04 AM
#21
Driver
Join Date: Feb 2001
Location: So. California
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
AristoV300:
Do you have a dyno sheet of when you Dynoed at 250 rwhp? I am curious to see the power curve.
"5.8 came up because my blitz gauges reads .05"
Do you mean that the blitz gauge read 0.50 of boost?..if so, thats about 7psi, not 5.888. =) Weither you have it reading in kg/cm2 or Kpa, 1.00 = ~14.4psi.
Thanks again for the info...
Willie
AIM: Jza8shwoff
Biggie27:
The TRD supercharger for the 2jzge would be a Roots Type, just like the ones for the Camry, 4runner, etc. Not too sure about the SRT / TRD colaboration...SRT uses thier centrifugal s/c design
Do you have a dyno sheet of when you Dynoed at 250 rwhp? I am curious to see the power curve.
"5.8 came up because my blitz gauges reads .05"
Do you mean that the blitz gauge read 0.50 of boost?..if so, thats about 7psi, not 5.888. =) Weither you have it reading in kg/cm2 or Kpa, 1.00 = ~14.4psi.
Thanks again for the info...
Willie
AIM: Jza8shwoff
Biggie27:
The TRD supercharger for the 2jzge would be a Roots Type, just like the ones for the Camry, 4runner, etc. Not too sure about the SRT / TRD colaboration...SRT uses thier centrifugal s/c design
10-12-01, 09:23 AM
#22
Driver
Join Date: May 2001
Location: LA
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Aristo,
You said that Area51 is looking to supercharge a GS400, is there a discount for the guinea pig?
Also, I think you need to get the Blitz Power Meter so that you can "dyno" the car and have a better idea of what you're running. I think it was in the lastest issue of Turbo/Super Street? and it showed to be pretty accurate.
You said that Area51 is looking to supercharge a GS400, is there a discount for the guinea pig?
Also, I think you need to get the Blitz Power Meter so that you can "dyno" the car and have a better idea of what you're running. I think it was in the lastest issue of Turbo/Super Street? and it showed to be pretty accurate.
Thread
Thread Starter
Forum
Replies
Last Post
