Lower door panels
#2
Driver School Candidate
Join Date: Jan 2004
Location: Colorado
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I did this last night ( The wife opened the door on a HIGH curb and it cracked the rubber thingy at the bottom... It is very easy just make sure it is warm so you dont break the plastic clips. You have three black nuts to remove they were 10mm then take a screw driver with a small towel around it and pry slowly @ the bottom. It should all them just come off.
#6
Lexus Champion
Removing lower cladding.
ShowDiscipline,
Inner door panels stay on. Just remove the black 10mm nuts and the rest is held on by double stick foam and plastic clips. You can also look at the new one and figure it all out. It's easy.
Will
Inner door panels stay on. Just remove the black 10mm nuts and the rest is held on by double stick foam and plastic clips. You can also look at the new one and figure it all out. It's easy.
Will
#7
exclusive matchup
iTrader: (4)
Re: Removing lower cladding.
Originally posted by TAMR_GUS98
ShowDiscipline,
Inner door panels stay on. Just remove the black 10mm nuts and the rest is held on by double stick foam and plastic clips. You can also look at the new one and figure it all out. It's easy.
Will
ShowDiscipline,
Inner door panels stay on. Just remove the black 10mm nuts and the rest is held on by double stick foam and plastic clips. You can also look at the new one and figure it all out. It's easy.
Will
Thread
Thread Starter
Forum
Replies
Last Post
sallydrive
IS - 2nd Gen (2006-2013)
1
08-14-12 07:27 PM
erayd8
Lexus Audio, Video, Security & Electronics
4
11-06-02 06:44 PM