Found an interesting rear diffuser on ebay
#1
Found an interesting rear diffuser on ebay
Is this the stock diffuser upside down? or something new?
http://www.ebay.com/itm/For-2013-2014-GS350-F-Sport-PU-Rear-Bumper-Polyurethane-Lip-Body-Kit-Add-On-/161600665999?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A2013%7CMake%3ALexus&hash=item25a026798f&vxp=mtr
http://www.ebay.com/itm/For-2013-2014-GS350-F-Sport-PU-Rear-Bumper-Polyurethane-Lip-Body-Kit-Add-On-/161600665999?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A2013%7CMake%3ALexus&hash=item25a026798f&vxp=mtr
Last edited by SNiiP3R; 03-01-15 at 04:24 AM.
#3
Lead Lap
iTrader: (1)
Is this the stock diffuser upside down? or something new?
For 2013 2014 gs350 F Sport PU Rear Bumper Polyurethane Lip Body Kit Add On | eBay
For 2013 2014 gs350 F Sport PU Rear Bumper Polyurethane Lip Body Kit Add On | eBay
Last edited by 13FSPORT; 03-01-15 at 08:35 AM.
#6
Lead Lap
Thoughts what i thought, looks like a bmw 3 series mod. The diffuser would look good if it was complimented with a body kit to fatten it up a bit. It looks out of place and unrefined on a stock body.
#7
Only the duckbill trunk spoiler is typical BMW CSL. Diffuser looks similar to the Tom's diffuser for the 2is. Looks aggressive. I kinda like it. That car needs moar low to pull off the look, imo.
Trending Topics
#8
Lexus Test Driver
I really like it and I think it'll look good with my front spoiler.
But I know these knock offs will have fitment problems like my front lip and it'll be a big pain to make them fit!
But I know these knock offs will have fitment problems like my front lip and it'll be a big pain to make them fit!
#11
Lexus Test Driver
#12
Anyone brave enough to be a guinea pig? Fitment would probably be an issue because it has to fit both exhaust surrounds and sit flush up the rear bumper. A good paint job would make it not look so cheap.
#14
#15
Driver School Candidate
Join Date: Nov 2015
Location: New York
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I decided to be a guinea pig and try it out. Fitment is horrible. Needs a lot of work to make it fit. Slight small gaps due to it not conforming to the body line properly but with a lot of patience and work and a good paint job from the body shop, it came out looking alright. The fitment is very close to oem fitment after working with the PU for a few days with minimal to no gaps. All in all i'm happy with the end result.