bigblack06

iTrader: (20)

So if anyone from the 3GS remembers these they will know what I'm talking about. I plan to get them installed after I come back from vacation or hopefully earlier if I get my car back. These aluminum blocks are an alternative to lowering your car without springs that may cause issue's with the AWD system and also keeps everything OEM. I will keep you all posted when they are installed and will post pics of the process. Also these are for the front only, not sure how it will turn out but I'm sure I'll find out. These are for a small 20mm drop so hope it doesn't look weird.

JC-RH

iTrader: (1)

in for updates

k20eg

Can these be used with lowering springs to lower the car more? I have my car on springs but interesting in lowering a little more without going to coilovers which would eliminate the AVS.

sydtoosic

Lets get it poppin bigblack. Subscribed...

sam430

iTrader: (10)

You would still need the rear RCA of some sort to keep the rear in check. It's great for saving your OEM shocks toobtw

sam430

iTrader: (10)

It would lower it by the height of the rca.

bigblack06

iTrader: (20)

Yes these would work, they are not like springs as they sit on the control arm, so all the OEM functions are still intact.

sam430

iTrader: (10)

Is sage researching ways to give us RCA for the front and rear? Anyone else have info?

0mghi2u

iTrader: (3)

Any updates on install?

sam430

iTrader: (10)

Isn't sage located in California? There is plenty of 4gs out there to test on.

mvierneza

Any update/ pics? Interested to determine your final results. Thanks.

islandbeef

Thanks for your efforts BB6!

bigblack06

iTrader: (20)

These will work with the 4GS it was confirmed on a 3IS.
http://lexi-imports.blogspot.com/201...-30mm-for.html

sam430

iTrader: (10)

So you never installed yours?

SSTG

So these could be used to lower the front even more with drop springs?
That would solve the issue of the rear being lower than the front that is a common issue with drop springs!