When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Whats up with that exhaust? Do you have a linky poo? Are those like baffles in the tips of the exhaust?
Exhaust is Joe Z....
No baffles were added what you are seeing is stock
Originally Posted by terrycs
I am also interested to know if the 285 tires cleared everything. Alignment back to factory spec?
Is this the standard Vossen setup which is usually 20x9 (32mm offset) and 20x10.5 (45mm offset)?
The exhaust is axle back design?
Well done! Looking forward to seeing your car in person!
The 285 cleared fine..There was slight rubbing when going over dips, but then I grounded down
the inner quarter panel a bit and applied a corrosion protection
Alignment to be determined this week by Tustin Lexus
They are the standard Vossen set up 20x9 32mm offset and 20x10.5 45mm offset
Yes, this is the Joe Z axle back
Originally Posted by bentleymp2
So you have 245/35 and 285/30?
I know I'm being a bother, but can I ask why you chose those profile sizes?
Thank you!
No bother at all..
The profile I chose was a perfect fit. I wanted the largest tire I could fit in the rear
Well, I decided to go with the F sport front bumper...I had the body shop paint the bumper and grills just like my other one. Here is a split screen so you could see the deference..
Just got my alignment done @ Tustin Lexus. Here is the specs..The camber is out all the way around, but I expected that. It's not that bad compared to some I have seen though