djpeakSD

Ok,

So I am going to pull the trigger on some CV3's I have read all through the 3gs vossen thread, and noticed guys were running different setups. I just have some questions for people with 4gs and Vossens.

Is there more room in fenders in 4gs than 3gs?

I want to run 20x9 245-35-20, and 20x10.5 285-30-20 Will this rub stock, and will it rub once I t t throw a drop on it (with the first set of springs that come out, like the tanabes)?

What is the difference for the front in +32 or +38 offset?

I think Vossen recomends 285-25-20 for the rear but I dont want tires that small, can anyone help clear all this up for me?

Thanks in advance

DoriSaru15

I think you will be OK. Honestly springs doesn't lower your car that much.

IAMJAVEDG

iTrader: (5)

Recommended tire size is 285/30/20

mrpartsman

I have 20x10 CV2 in the rear with 275/30/20, I no if i lower it i would not have any rub issue at all, I think one of the guys had 285 with 20x10.5 and lowered , had a rub issue.find out from mike@vossen.

djpeakSD

I think we could roll our fenders though if that is the case right?

mrpartsman

probably , but I wont do that to a new car.

GammaLex

285 will rub you need 275

djpeakSD

This makes it interesting, but this guy says at stock height he does not rub.
https://www.clublexus.com/forums/gs-...t-project.html

djpeakSD

The 275 is not flush with the wheel and I don't like that u know.

GSGUAM

Which tires r u running...I have 275 PS2's and there are flush on the CV7's...But my CV3 with VSteins were NOT flush...

BTW the CV7's look much more sweeter on the GS

mrpartsman

here is a pic of mine,its flush to me.I dont know.

djpeak10

Do you have a 10 inch rear or 10.5?

djpeak10

picy poo please.

GSGUAM

I will post a teaser shortly....with a full blown thread when the Body kit and other goodies are on

mrpartsman

20x10 in the rear.