jj14

Thanks Bill_GS3.
Did you need anything in addition to the bulbs? (or was it just a simple switch of the bulbs?)

Regarding your comment about these being too bright, are you concerned about these generating too much heat and damaging the GS's fog light enclosure? or is it due to concern about it blinding oncoming traffic?
Or is it just that incredibly bright?

Bill_GS3

Just the bulbs is all you would need.

The brightness concern seem to stem from the scattering of the light, it spreads out more. Also the halogen bulbs have that black tip where as the LEDs actually hav LEDs on the end.

I think the light may be an issue with oncoming traffic, but have not gotten anyone flashing at me yet.

jj14

This is very tempting. I may just buy these. Thanks Bill

1111GS

I was wondering why 2-3! I took our three on one side and on the other side I took 2 + 1 from the mud guard but I was still able to get in there. Thank you for the tips. I was impatient so I got this set from Walmart. They are definitely brighter but only slightly whiter. I did one first and compared to the original one. Not as white and close as the headlamp. I think I'm going to order the ones suggested in this thread. Thanks again.

NG2

So I am probably going to pre-order these: http://www.vleds.com/bulb/h-series/h...-pair-b-o.html

Can anyone on here confirm all I need to do is simply place these into the Nigel JDM fog's I had installed on my F-Sport?

Thanks.

onexcite

Yup just plug and play.

NG2

Thanks. I just pre-ordered and will post a picture once I get them / installed.

onexcite

Anyone trying these on yet?

http://www.ebay.com/itm/Nokya-Hi-Pow...513d0b&vxp=mtr

UCF3

Fellas:
Question for all. Is the 9005/9006 bulb an option on our 4GS cars, especially the fog lights? I've only come across the H11 for fog lights.

Renrutjw

Once you pop out the lower bumper liner just reach up inside and grab the back of the bulb and twist to the left. You can watch your progress through the lens. Once it's out and visible, remove and replace. When you re-install again watch through the lens as you line up the three tabs. Once lined up push in and twist right. Replace the three bolts and repeat on the other side (which will take half the time - steep learning curve). VLEDS H11 5k is a great replacement bulb BTW.

ItzFilyO

U guys know that the regular H11 bulbs won't fit in the fog light housing right? Our cars use H16 bulbs which looks a lot like H11 but they're smaller and only 19 watts, not 55 watts like H11.

Left: HB3 - 65W
Middle: H11 - 55W
Right: H16 - 19W

Im2bz2p345

Here is an excellent DIY on the LED conversion put together by CL user GregCanada here: https://www.clublexus.com/forums/gs-...og-lights.html

~ Im2bz2p345

Joe Z

iTrader: (10)

For the 4GS... They may have changed the Bulb / Housing since the launch back in 2012..


Joe Z

ItzFilyO

Yes 4GS uses H16.

Joeb427

iTrader: (1)

My fogs are H11 VLEDS 5K LEDS.
'14 and '15 has oem LEDS.H16?