Jkenny

Looking at option 5, is everything included that's needed other than tape and fasteners?

Nigel-JDMParts

iTrader: (74)

Yes, option is 5 included all the hardware and you need to do the wiring.
http://nigel-jdmparts.com/2013-gs350...-light-housing

Jkenny

Thanks Nigel, I will be ordering soon.

Nigel-JDMParts

iTrader: (74)

Jkenny

Option 5 ordered! Love the look of the F Sport front end with the Fogs!!

Jkenny

Hey Nigel PM sent to you

johnphan79

Hi All,

Finally, i got my Fog light installed on 2013 GS350 F-Sport. Very happy with the result.

I'm using
1. MORIMOTO XB LED FOGS (TYPE T)
2. http://www.ebay.com/itm/131349802011?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT3. http://www.ebay.com/itm/381061322004?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT4. a set a F Sport bezel cover from Nigel_JDM

Note: I have my audio guys hooked up the remote cable for the Fog with my amp remote signal. So, my fog light will turn off when the car turn off.

Let me know what you guys think.

Thanks

Next: mod: maybe paint the calipers. Yellow??? ;-)

Yardi78

Those look good I'm a new GSF owner and thought it weird it didn't come with fogs. I'll probably being doing this after a few other mods.

duraiaras

Great looking. I like to get this done on my 2015 GS350 F Sport. Do you think it would be compatible? When I checked ebay for compatibility it says not compatible. Also, did you get Option1 (just the bezel) from Nigel? Other than these 4 parts you listed is there anything else required?

johnphan79

Hi,

I got option 1 from Nigel which only the bezel. (shipping took over a week)

Not sure on 15 GSF tho. But you can ask Nigel to see if those bezel will fit your ride.

As for my setup:

Get all the things listed above and you will be fine.

As for screw... well... u needs 4 screws total. 2 each Fog light... and both are on the bottom bracket. Note: the screw hole to mount the fog is not puncher. So, dont be alarm when you screw it in. Its will puncher threw the front a bit but the bezel will cover it. I use 3/4" long screw.

Another thing: The harness kit i bought the wiring a bit short. So, i extended both fog light wires for another maybe 7".

I hope this help.

duraiaras

Thank you johnphan79. Good to know. I'll start collecting parts and hope all turns out well. Fog lights is my priority on a F Sport. Just for the sake of having it. Damn Lexus.

johnphan79

anytime..

tamermido1

Does it work with the cluster light in the dashboard?

Chris442

tamermido1 - Did I read on one of the threads that you got your fog dash light to work?

If not has anyone gotten theirs to work and if so how?

Thanks.

PK_Celsior

iTrader: (18)

If there is a will there is always a way!