4th Gen GS Aftermarket Wheel Thread
#302
#306
Driver School Candidate
#307
Driver School Candidate
Join Date: Aug 2014
Location: Singapore
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#309
Driver
iTrader: (4)
Finished the photo shoot today (I am not a professional photographer though I did my best) - this will just give more people ideas of what to do or not to do
** RSR Down Springs **
** 20" NewGen Wheels (3-piece) - GRIP **
NewGen Wheels is an up an coming wheel design company local to SoCal and their wheels (NewGen Lite) are pictured in the new Tranformers 4 movie on Bumblebee:
http://tinyurl.com/NewGen-Transformers
TIRES = Michelin Super Sport K1 (front) = 235/35R20
TIRES = Michelin Super Sport (rear) = 285/30R20
20x9 +32 = (fronts)
20x10.5 +45 = (rear)
COLOR:
Centers = Evo grey
Outer Lip = Gloss Black
Inner Barrel = Matte Black
** Hidden valve stems behind spoke with original TPMS in back of wheel **
ALL powder coating was done by "No Limit Powder Coating" in Ventura, CA - Steve the owner does quality work at a great price!
For some reason I couldn't get the color right...I think it was because of a filter I used when I took the picture (but you get the idea just for the look)
** RSR Down Springs **
** 20" NewGen Wheels (3-piece) - GRIP **
NewGen Wheels is an up an coming wheel design company local to SoCal and their wheels (NewGen Lite) are pictured in the new Tranformers 4 movie on Bumblebee:
http://tinyurl.com/NewGen-Transformers
TIRES = Michelin Super Sport K1 (front) = 235/35R20
TIRES = Michelin Super Sport (rear) = 285/30R20
20x9 +32 = (fronts)
20x10.5 +45 = (rear)
COLOR:
Centers = Evo grey
Outer Lip = Gloss Black
Inner Barrel = Matte Black
** Hidden valve stems behind spoke with original TPMS in back of wheel **
ALL powder coating was done by "No Limit Powder Coating" in Ventura, CA - Steve the owner does quality work at a great price!
For some reason I couldn't get the color right...I think it was because of a filter I used when I took the picture (but you get the idea just for the look)
#312
Driver School Candidate
Join Date: Aug 2014
Location: Singapore
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
By the way, what finish did you specify for the barrel? Looks good.
I notice you put in R and A disks for the front and rear respectively. Did you put in a BBK or are you planning to? I'm thinking of going with A and O disks.
#313
Pole Position
iTrader: (1)
Thanks, just making sure as someone mentioned rubbing issues with 20x10.5 +45 rims. I assume no fender work was done?
By the way, what finish did you specify for the barrel? Looks good.
I notice you put in R and A disks for the front and rear respectively. Did you put in a BBK or are you planning to? I'm thinking of going with A and O disks.
By the way, what finish did you specify for the barrel? Looks good.
I notice you put in R and A disks for the front and rear respectively. Did you put in a BBK or are you planning to? I'm thinking of going with A and O disks.
No fender work has been done,
A and O disk I'm not really familiar with. The shop I ordered from took care of that. I assumed a and o meant front and back but I don't know.
The finish for the barell I believe was standard color. As far as BBK the F sport has BBK already and they just barely fit . I want to upgrade to Brembos someday but have been told it should have no issues . These wheels were made to clear BBKs
#315