TRACKMKIII

Hey guys just wondering if anyone is using LED turn signal bulbs and if so what flasher relay are you using to fix the "Hyper Flash " issue? I really like the Switchback LED type B from Superbrightleds.com and I want to order the correct relay at the same time. I have seen some people wire resistors in line but I would like to avoid that. Thanks in advance!

Salcedo90

So just putting the LED in stock connector will make it flash to fast?

TRACKMKIII

Yes if you just put them in they will flash fast because of the lower resistance. The system thinks the bulb is blown or not there.

NTH

I'm interested to know as well.

TRACKMKIII

I am going pull my flasher relay this week and compare it to the LED relays to see which one will fit. Let you guys know what I find.

Wald GS

iTrader: (1)

I think that's the one I am using.

TRACKMKIII

Areyou talking about the relay you are using?

TRACKMKIII

Installed the LED turn signals today (Superbrightleds.com 1157 Switchback Type B bulbs) and of course I had "Hyper Flash" but I was able to modify the stock flasher relay to work properly with the LED bulbs!! So there was no need to by another relay or install resistors.