Proud New Owner Of A 93 GS300 with a 2JZGTE Swap
#17
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NM
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
#19
Driver
iTrader: (3)
Join Date: Sep 2011
Location: tx
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
fcd is just to eliminate the fuel cut so you can up the boost. You want to eliminate speed limiter, greddy and hks make one however some vehicles it has worked on and others not.
I was able to get a mines ecu that eliminated speed cut, changed the timing and fuel maps as well as raise the rev limiter and I cost me $250 (which is a steal) so you just have to constantly be looking.
Emanage will eliminate the speed and fuel cut as well and is easier to find. Do some research to decide but a lot of people have had good results with the eman setup
I was able to get a mines ecu that eliminated speed cut, changed the timing and fuel maps as well as raise the rev limiter and I cost me $250 (which is a steal) so you just have to constantly be looking.
Emanage will eliminate the speed and fuel cut as well and is easier to find. Do some research to decide but a lot of people have had good results with the eman setup
#20
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NM
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
fcd is just to eliminate the fuel cut so you can up the boost. You want to eliminate speed limiter, greddy and hks make one however some vehicles it has worked on and others not.
I was able to get a mines ecu that eliminated speed cut, changed the timing and fuel maps as well as raise the rev limiter and I cost me $250 (which is a steal) so you just have to constantly be looking.
Emanage will eliminate the speed and fuel cut as well and is easier to find. Do some research to decide but a lot of people have had good results with the eman setup
I was able to get a mines ecu that eliminated speed cut, changed the timing and fuel maps as well as raise the rev limiter and I cost me $250 (which is a steal) so you just have to constantly be looking.
Emanage will eliminate the speed and fuel cut as well and is easier to find. Do some research to decide but a lot of people have had good results with the eman setup
#21
Lexus Test Driver
iTrader: (4)
Join Date: May 2007
Location: Da hill fl
Posts: 1,307
Likes: 0
Received 0 Likes
on
0 Posts
I know this car its built and painted by my mechanic who did my swap larry from team orange, somebody must have bought it and then sold it to you. If i'm not mistaken it should have fresh interior which was redone and i think the exhaust is blitz but i could be wrong but if you bought it in south florida then this is the car.
#23
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NM
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I know this car its built and painted by my mechanic who did my swap larry from team orange, somebody must have bought it and then sold it to you. If i'm not mistaken it should have fresh interior which was redone and i think the exhaust is blitz but i could be wrong but if you bought it in south florida then this is the car.
#24
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NM
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Yes! I like it a lot when I get to drive it lol My fiance kinda took over drivin it cuz she cant drive any other cars cuz they are manual lol When I do drive it is is really fun. I hate the wheels tho..they are really heavy 19's and I am swapping them out for some 17x9.5 +25 Advan RG2's in gold in the next couple days. I am hoping with the wheel up grade it make a good difference in acceleration and braking
#29
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NM
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
solowlex
GS - 2nd Gen (1998-2005)
39
12-20-12 01:11 PM
2jz, 2jzgte, 93, chicago, coast, craigslist, east, gs300, interchange, is300, lexus, sale, suspension, swap, swapped