Interchangable Suspension Parts: Parts that work on our chassis.
#1
Interchangable Suspension Parts: Parts that work on our chassis.
I think something like this has been delayed for a while, so I will take the initiative.
Here is a list of adjustable suspension parts that can be interchanged:
Parts from other platforms: CONFIRMED
-RCA's from 2nd Gen Aristo/GS Night Pager RCA's
-Front Upper Adjustable Arms from 2nd Gen Aristo/GS
-Front Spindle from X90,100,110-IS300-2nd Gen Aristo/GS
-Inner Tie Rod: JZZ30
-Ball Joint: JZS160
-Rear Swaybar Links: JZZ30
Parts from other platforms: UNCONFIRMED/IN TESTING-THEORY
-Front Lower Arm: X90 and IS300
-Front Tension Rod: X90 and IS300
-Rear Lower Arm: UZZ40-JZX110-SXE10-JZS161
-Rear Toe Arm: IS300
-Rear Sway bar and end links: Supra TT MKIV <--Unlikely, parts do not come close to stock ones. Only an installation picture set will confirm this.
-Rear camber bolt: 93~96 Camry/ES300
IF YOU KNOW MORE, PLEASE UPDATE THE LIST WITH PICS.
Thanks to RockAuto fro the pics and part numbers.
Parts comparison per vehicle. All parts shown are right side. If a model is missing from the picture set is because the part never even came close to look like a JZS147 part.
Inner Tie Rod
Outer Tie Rod
Upper Control Arm
Lower Control Arm
Ball Joint
Front Sway Bar Links
the gold one is from a JZA80
Rear Sway Bar Links
As soon as I get some parts I will start posting pics. Lets make this list the best list on the internet!
Update:
Heres something that hasn't been discussed! the rear RUCAs from the same year range SC/ soarers has the same part number (48770) as the JZS147.
94 SC300 rear suspension diagram:
http://www.lexuspartsnow.com/Page_Pr...igPicture=True
96 GS300 rear suspension diagram:
http://www.lexuspartsnow.com/compone...8-04-1634.html
Thanks CubanGS!!!
Supra Upper Rear Control Arms confirmed by CubanGS:
SC toe and trac links confirmed by CubanGS:
http://battleversion.com/store/battl...exus/sc-91-00/
It would be cool if a mod would sticky this as well.
Here is a list of adjustable suspension parts that can be interchanged:
Parts from other platforms: CONFIRMED
-RCA's from 2nd Gen Aristo/GS Night Pager RCA's
-Front Upper Adjustable Arms from 2nd Gen Aristo/GS
-Front Spindle from X90,100,110-IS300-2nd Gen Aristo/GS
-Inner Tie Rod: JZZ30
-Ball Joint: JZS160
-Rear Swaybar Links: JZZ30
Parts from other platforms: UNCONFIRMED/IN TESTING-THEORY
-Front Lower Arm: X90 and IS300
-Front Tension Rod: X90 and IS300
-Rear Lower Arm: UZZ40-JZX110-SXE10-JZS161
-Rear Toe Arm: IS300
-Rear Sway bar and end links: Supra TT MKIV <--Unlikely, parts do not come close to stock ones. Only an installation picture set will confirm this.
-Rear camber bolt: 93~96 Camry/ES300
IF YOU KNOW MORE, PLEASE UPDATE THE LIST WITH PICS.
Thanks to RockAuto fro the pics and part numbers.
Parts comparison per vehicle. All parts shown are right side. If a model is missing from the picture set is because the part never even came close to look like a JZS147 part.
Inner Tie Rod
Outer Tie Rod
Upper Control Arm
Lower Control Arm
Ball Joint
Front Sway Bar Links
the gold one is from a JZA80
Rear Sway Bar Links
As soon as I get some parts I will start posting pics. Lets make this list the best list on the internet!
Update:
Heres something that hasn't been discussed! the rear RUCAs from the same year range SC/ soarers has the same part number (48770) as the JZS147.
94 SC300 rear suspension diagram:
http://www.lexuspartsnow.com/Page_Pr...igPicture=True
96 GS300 rear suspension diagram:
http://www.lexuspartsnow.com/compone...8-04-1634.html
Thanks CubanGS!!!
Supra Upper Rear Control Arms confirmed by CubanGS:
SC toe and trac links confirmed by CubanGS:
http://battleversion.com/store/battl...exus/sc-91-00/
It would be cool if a mod would sticky this as well.
Last edited by jmax.garage; 04-19-13 at 12:25 PM.
The following users liked this post:
UZS143 (03-15-22)
#3
One interesting setup I found: shortening the spindle 20mm, adding RCA's, then raise the coilover back up to set the suspension the geometry back to stock.
Benefits: lowering the car about 20mm without affecting the suspension's gemoetry
metal_dokan-img600x450-1265460252dx.jpg?t=1268156006
Also this is what RCA's are for:
Thanks for T3 for the pic!
Benefits: lowering the car about 20mm without affecting the suspension's gemoetry
metal_dokan-img600x450-1265460252dx.jpg?t=1268156006
Also this is what RCA's are for:
Thanks for T3 for the pic!
Last edited by jmax.garage; 04-02-10 at 09:15 AM.
Trending Topics
#12
JZA80's and JZZ30's (Supra and Soarers) front coilovers fit, the rears need to be modified from the Supra; i dont know about the Soarers/SC rears. The downside of these coilovers is that the damping is a bit harsher and the coilover itself is way shorter than a coilover made specifically for our big heavy cars. If u want a car so slammed and rigid that is very hard to drive as a DD, go with these coilovers. I had Teins froma MKIV for about 6 months and I hated I couldn't raise the car enough to drive comfortably.
Indeed, I will include them in the list.
Indeed, I will include them in the list.