GS - 1st Gen (1993-1997) Discussion about the first generation GS300

whats going on with my motor!!

Thread Tools
 
Search this Thread
 
Old 01-27-06, 07:57 PM
  #1  
ZeekGS300
Pole Position
Thread Starter
iTrader: (1)
 
ZeekGS300's Avatar
 
Join Date: Oct 2004
Location: California
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default whats going on with my motor!!

it started off by my car engine shaking a little bit and then it shakes alot more.. i drove it up to the bay area and then i parked and then when i got in the car a few hours later when i started it the engine shakes and then when im pushing on the gas it has a lag.. i havnt tuned the car up since ive had it! =/ it feels like if one of the spark plug wires came off or something but i checked that so im wondering what it can be? what do you guys think i should change so i can get my gs back on the road again!
Old 01-27-06, 08:12 PM
  #2  
turbogs300
Lead Lap
 
turbogs300's Avatar
 
Join Date: Apr 2004
Location: Arizona
Posts: 790
Likes: 0
Received 0 Likes on 0 Posts
Cool

Did you wash the engine?
Old 01-27-06, 08:16 PM
  #3  
ZeekGS300
Pole Position
Thread Starter
iTrader: (1)
 
ZeekGS300's Avatar
 
Join Date: Oct 2004
Location: California
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

well it started like this.. i replaced the harmonic balancer after that was replaced it barley shook a little bit and then a few days when by and i degreased the motor and then a few days after that it started shaking more. and now it just shakes..i havnt turned the car on for about a day and 1/2 now

Last edited by ZeekGS300; 01-27-06 at 08:19 PM.
Old 01-27-06, 08:27 PM
  #4  
turbogs300
Lead Lap
 
turbogs300's Avatar
 
Join Date: Apr 2004
Location: Arizona
Posts: 790
Likes: 0
Received 0 Likes on 0 Posts
Cool

DORK!!!!!! Don't ever spray water or degreaser on the top of a 2jz motor. The plugs are now sitting in a pool of water. Disassemble intake, blow out all the water with compressed air and DON'T EVER DO THAT AGAIN!!!
Old 01-27-06, 08:32 PM
  #5  
ZeekGS300
Pole Position
Thread Starter
iTrader: (1)
 
ZeekGS300's Avatar
 
Join Date: Oct 2004
Location: California
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

wouldnt it started right away tho? thats what i would think
Originally Posted by turbogs300
DORK!!!!!! Don't ever spray water or degreaser on the top of a 2jz motor. The plugs are now sitting in a pool of water. Disassemble intake, blow out all the water with compressed air and DON'T EVER DO THAT AGAIN!!!
Old 01-27-06, 08:38 PM
  #6  
turbogs300
Lead Lap
 
turbogs300's Avatar
 
Join Date: Apr 2004
Location: Arizona
Posts: 790
Likes: 0
Received 0 Likes on 0 Posts
Cool

Originally Posted by ZeekGS300
wouldnt it started right away tho? thats what i would think
Not always, if the plug wires had a decent seal on the plugs, it might take some steam or heating and cooling to get the voltage to conduct to the water in the plug wells. Pull it apart and I bet you'll find water or degreaser. Then send me my $10 for being right
Old 01-27-06, 08:41 PM
  #7  
ZeekGS300
Pole Position
Thread Starter
iTrader: (1)
 
ZeekGS300's Avatar
 
Join Date: Oct 2004
Location: California
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

do you have AIM? if so my sn on it is Lexusgs300on22s hit me up
Old 01-27-06, 09:51 PM
  #8  
turbogs300
Lead Lap
 
turbogs300's Avatar
 
Join Date: Apr 2004
Location: Arizona
Posts: 790
Likes: 0
Received 0 Likes on 0 Posts
Cool

Originally Posted by ZeekGS300
do you have AIM? if so my sn on it is Lexusgs300on22s hit me up
No I don't , too much spyware and garbage from AOL. Don't drive the car till you get the water out of the plug wells. Search on here for the procedure to remove the intake and throttlebody.
Old 01-27-06, 09:51 PM
  #9  
ZeekGS300
Pole Position
Thread Starter
iTrader: (1)
 
ZeekGS300's Avatar
 
Join Date: Oct 2004
Location: California
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

can somebody find instructions where i can see how to remove the intake and throttlebody on my gs300? anybody? thanks
Old 01-28-06, 01:28 AM
  #10  
Jmai22
Lexus Fanatic
 
Jmai22's Avatar
 
Join Date: Nov 2001
Location: California
Posts: 5,203
Likes: 0
Received 0 Likes on 0 Posts
Default

This is very true, I just had the same thing happen about 2 weeks ago due to a mechanic that fixed my car and thought he was doing me a favor and wash my engine. If you look under the car your cats should be glowing red after about 5 minutes of driving like this. VERY DANGEROUS.
Old 01-28-06, 07:47 AM
  #11  
SuprRunner
Intermediate
 
SuprRunner's Avatar
 
Join Date: Apr 2003
Location: Utah
Posts: 495
Likes: 0
Received 5 Likes on 5 Posts
Default

I really don't know why they didn't do a full cover like they did on the GTE motor. I can't wait to go GTE valve covers...then I can wash my engine withought having to dry the plugs.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
92_1uz
Performance & Maintenance
5
07-15-09 06:53 PM
nyjdmevo
Performance & Maintenance
17
06-19-09 05:26 AM
CCC-TT
Performance & Maintenance
14
06-06-07 01:30 PM
svtdubs
Performance & Maintenance
12
10-13-06 04:04 PM
sc300vb
SC- 1st Gen (1992-2000)
43
04-17-03 12:21 PM



Quick Reply: whats going on with my motor!!



All times are GMT -7. The time now is 07:47 AM.