mrkwinning

Anyone here with 20" wheels dropped on NF210's was able to get factory specs after an alignment? How close was the camber back to stock specs? I am currently on 20" without a drop and I already have about -2 or -3 camber. Was wondering after drop and alignment would correct this?

I heard from another thread that the RSR Super Downs was not able to get the stock specs dialed in since the drop was past the range of stock adjustments. The NF210 has a mild drop so can be adjusted?

homeboyv

Well SPC makes a camber kit for our cars, I believe that it will adjust up to 3 degrees. I just dropped my car on RSR coilovers with the camber kit and am getting it aligned today. Will report back if I'm able to get it back within spec.

shurik74

iTrader: (5)

I would recommend to install a camber kit... got mine installed over the weekend + tanabe

mrkwinning

Do you have 20" wheels installed with the tanabe? Did the SPC Camber dial everything back to stock or do you still have negative camber "butterfly look"?

shurik74

iTrader: (5)

I'm still waiting for wheels to be delivered next week then will do alignment. SPC camber kit gives 3 degree range, way enough to set alignment properly. With stock set up I was just on the boarder to go negative and still my tires were gone in 6k+ miles.

mrkwinning

I have not gotten mine align yet but with 20" 20x10 in the rears, I can see a few degree's negatively impacting the ties already. Expect to go more negative when your wheels installed.

My car was perfect on stock rims but as soon as I put the new rims on, it had negative camber without lowering yet.