350Pearl

iTrader: (4)

I'm not sure how much fender work I would need with a wheel set up that I'm really interested in getting, so I'm writing this thread to get an idea. I will be on air and prefer not doing anything major to the fenders just yet. The wheel setup I'm looking at is:

19x9.5 +20 Front 19x10.5 +20 Rear

Thank you!

jjashaa

iTrader: (2)

i'm running 20x9 +30 and 20x10.5 +35 in this photo before my fenders started getting pulled on the fronts and I did little more pulling in the rear..

235/35/20 and 275/30/20.. only shaved rear fenders in the photos below with as much negative camber possible within reasonable toe specs with stock suspension components.








now i'm at 20x9 +20 with 235/35/20 tires in the front but same specs in the rear.. still rub in rear when aired out and fronts do too but only because fender liner... heh... i did hammer in some of the tabs so driving straight tucking tire is doable.