When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Need some help guys. I bought NF210 lowering springs, and my car still sits higher in the front. From all the pics I've seen after install they all look nose heavy.. Is there a possibility that the installer put the front springs in the back and vise versa? I'm very disappointed at this point. Any info would help.
Bumping this up just to see if anything running this same setup (NF210, 15mm front and 20mm rear) has also run 245/40 and 275/35 tires to replace the stock 235/40 and 265/35. I ordered the coils and spacers today, so I am hoping all fits nicely with no rubbing.
Wanted to share some pics of my 4GS lowered on Tanabe NF210s now that the spring have settled. I'm very happy with how this turned out. This is how the car should have come from the factory.
Thanks to Kevin and the rest of the 168 Motoring team. Best prices on the springs and labor by far. If you're in Socal I highly recommend giving them your business.
Picking up H&R spacers (15mm front and 20mm rear) tomorrow and getting them installed later this week to flush out the wheels.
That looks clean af, what kind of tires are you running (size)
@jarabanos You should head out to the Lexus Meet this Friday in Rancho Cucamonga so I can see our setup!!! Thinking about dropping mine too but with an in-person visual, it would really help me decide.
12-28-15, 09:10 PM
