When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It looks like the lower left-hand corner of the F-Sport emblem will be the exact same distance inward from the apex of the radius as the GS 350 emblem is measured. And, the bottom of both emblems will be the exact same distance above the bottom horizontal edge of the trunk lid. Just duplicate those two measurements (see below) of the GS 350 emblem for where to put the F-Sport emblem on the left side.
I'm going to use a piece of paper or a masking tape as the rectangle in the pic, then trim it to follow the trunk edge, then put a mark at the end of the GS350 badge. Then flip the paper and use it for the other side and there u have it, a perfectly aligned emblem. The inner yellow marking isn't important.
I'm going to use a piece of paper or a masking tape as the rectangle in the pic, then trim it to follow the trunk edge, then put a mark at the end of the GS350 badge. Then flip the paper and use it for the other side and there u have it, a perfectly aligned emblem. The inner yellow marking isn't important.
This is the one specifically for the 2015 GS. Got it from Sewell (RIP) for $20! That's even cheaper than the one they have on the main page, which is just a universal one, no guarantees it'll fit the GS curves.
Don't u just love it when everything is installed to perfection? Now my "like" for this car just rocketed by 1 Million points.
Those new f sport emblems are pretty cool! I was thinking of getting a pair! I wonder how it would look if you pull the 350 and stick the f-sport emblem there?
Already did mine months ago. It wasn't Straight. I will need to get some thin and sticky double sided tape and redo. I'll use a an android leveler app to help next time.
Have put it on today did use the tape to keep it straight, wiped it with meguirs 105 wow took off all the scratches I could see before on the paint also anyone planning to do this get the oem costed me 22$ and the finishing is superb compare to the 6$ eBay ones. Lemme know how it sits.
02-25-15, 09:18 AM
