JEFFOS69

iTrader: (1)

Hey guys looking for some help - can someone take a pic of their gs with AVS and specifically the AVS motor position for the front suspension and the positioning of the silver bracket that the motor locks into (it's under those black dust caps under the hood covering the tops of the suspension)?

I'll send 20 bucks your way in Canadian plasticy colored bill goodness if you can as I know it will take 15 mins of your time.

Thanks just want to do a double check to ensure I have everything a-ok after my suspension install.

Thanks!

Leonboy

iTrader: (1)

Hope this helps. .Courtesy of J5USA and myself.

JEFFOS69

iTrader: (1)

Thank you I have those directions however I need to see what direction the motors are (on top of those silver brackets) as they can fit both ways with the bracket.

Also I need both sides to ensure I'm not flipping the motor from one side to the other

Leonboy

iTrader: (1)

Believe it doesn't matter cuz the motor spins 110 degree clockwise when you turn to S+

JEFFOS69

iTrader: (1)

So if I ensure the motors are mounted and the rotating core turned all the way counter clockwise when placing back on I should be good?

Leonboy

iTrader: (1)

Don't mount the AVS module on the strut yet.leave it where you can see it from inside th he car. Then start the engine and you can see the module turn and go back to its default position. That's what I did to reassure the module prior to installing it to the bracket.
My previous installer manually turned the module counter clockwise before hooking it up to the bracket. Don't do that!!!! I feel that could damage the motor/module.its pretty straight forward and easy once you play with it a a few times. Good luck

JEFFOS69

iTrader: (1)

Excellent thank you - that should solve my question/issue. If you pm me your address I'll mail you out a 20 or I could paypal you.

Jaysoo

was there a yellow pin for the dampening adjustment for the coilovers?

JEFFOS69

iTrader: (1)

I didn't have anything for the adjustment of the dampening pin that came with mine. I found a tool I had at home that worked.

Leonboy

iTrader: (1)

No worries! That's what these forums are for. Glad to help.

JEFFOS69

iTrader: (1)

Delayed response but thanks! Much appreciated