The Only 4GS In The World To Lay Frame...
#16
I LOL at these hoopties when something goes wrong and their butt end starts sparking going down the street. Saw this as a cop working in the hood. Don't understand the lure of it, but the nice part is I don't have to. It's not my ride and do what makes you happy. Besides, it helps the economy
#18
I'm going to go the opposite direction and get a 6" lift kit for my GS. Who needs an RX 350 when I can drive an AWD GS350!
#19
#20
Wow, interesting!
As far as the turning questions, I "ASSUME" it's on air, so at ride height he just airs it up and can turn just as well as an unmodified GS4. Same thing goes w/ speed bumps, curbs etc.
If this isn't on air, and you are using coilovers, I too want to know how your getting around lol.
As far as the turning questions, I "ASSUME" it's on air, so at ride height he just airs it up and can turn just as well as an unmodified GS4. Same thing goes w/ speed bumps, curbs etc.
If this isn't on air, and you are using coilovers, I too want to know how your getting around lol.
#21
Driver School Candidate
Thread Starter
Join Date: Sep 2013
Location: nc
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
To everybody saying it's not drive able or functional it's on airrunner air suspension so it has every bit of function your stock GS has at whatever ride height I want. I had to cut out the sheet metal above the upper control arms for clearance to get the last inch of low. Wheels are rotiform ind 19x10. Thanks for all the compliments and yes I know I ruined a brand new car..
#23
Driver School Candidate
Thread Starter
Join Date: Sep 2013
Location: nc
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
They don't lay frame. They are about an inch higher than my car. I have the same setup as them but custom fabricated a set of top hats and did a lot of cutting and notching that they haven't done. So they don't lay frame. Close though.
#24
Lexus Champion
To everybody saying it's not drive able or functional it's on airrunner air suspension so it has every bit of function your stock GS has at whatever ride height I want. I had to cut out the sheet metal above the upper control arms for clearance to get the last inch of low. Wheels are rotiform ind 19x10. Thanks for all the compliments and yes I know I ruined a brand new car..
#25
Good job and thanks for clearing that up.
#26
i'm going to go out on a limb and say that the car is bagged... don't think he drives around like that unless his destinations are strictly straight line driving with no turns. i like it for what it is. he's going for slammed and he achieved it.
#27
Driver School Candidate
Thread Starter
Join Date: Sep 2013
Location: nc
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
#28
I'm that dumb. LOL
#29
The question is why do that to a nice car.