REDandBLAK

I have done a good bit of searching but can not find a thread on replacing the door lock actuator motors for the 3rd gen Lexus GS (easy to find for 2nd gen or LS models).

If a thread or post exists with details/pictures of how to replace the door lock motors could someone please link it?

Also, for the replacement motors does the 3rd gen GS use a round or flat shaft and also standard or long length?

I believe these can be used on the LS 430 but wanted to confirm that they would work on a GS 350 as well:
https://www.amazon.com/Central-Actua...ct_top?ie=UTF8

Any info would be greatly appreciated, I need to replace 2 of mine and will probably just do the rest as they are going to fail eventually too. I am hoping to not have to pay the dealer $1200+ to do this.

Thanks!!

burny

I have only done them in the 2002 GS300, but want to know the answer to this as well. You could always buy the round shafts and then file a side down to the D pattern if necessary. Please let us know which they are once you find out. thank you

REDandBLAK

I really need to get this done, it is annoying having them not work. Any help would be appreciated before I break down and take it to a dealer