Video of newly installed Megan Mid Pipe (GS430)
#16
Mount the mid pipe and you'll see it hitting the heat shield. Once you mount it up, Take a crow bar and a hammer and knock it in. Becareful to not knock it very far because it'll hit your diff. When you roll your car off the lift make sure you go forward and reverse a few times. Masboy another member on here ended up cutting the heat shield, either will work.
#17
Driver School Candidate
Join Date: Dec 2012
Location: Ky
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Hola Mi Amigos!
Stopped by the good people over at Megan Racing this Friday to do a little chit chat about future plans and it it so happens a little toy was waiting for me that I didn't know about.
The Mid pipe I've been waiting for has finally arrived! !
I wasted no time and installed it that night at Buddha Concept Designs. The Megan Mid pipe was design for the GS300&GS350 and its a simple bolt on. But with some helpful advice from my friend and fellow Clublexus Member "MasBoy", modifications to the GS430 was very minor. In the way on the 430 models is the heat shield which needed to be trimmed in the center of the "Y". After looking closer, It was actually easier than we thought. We went caveman style and we did was hammer in the edges where the pipes hit the shield, though you do have to be careful because if you bang the heat shield in the wrong direction the diff could start hitting it. Unfortunately I didn't get any photos while I was under the car but as soon as the lifts free, I will update this thread with photos underneath the car and the modifications. The install was real easy, also helped that I have a lift to my disposal. Piping is beautifully made and love the little roar I got out of it! Kudos to Megan racing for such a great product.
Heres a link to the item.
http://www.meganracing.com/products/...d=265&catid=20
as stated it's for the 300's and 350's but with little modifications it can fit the 430's. As far as 460's and H I have no idea.
Here are a few test clips shot after the car was done.
Revved a little louder at the shop and did another video at my home a few days later.
Megan mid pipe is stacked with the Greddy Evo3 and I have a Injen Intake from the 2nd gen GS430 which also needed a small mod to fit
Enjoy my friends
New Megan mid pipe stacked with Greddy axle back - YouTube
GS430 Greddy axle back, Megan mid pipe and Injen intake - YouTube
Stopped by the good people over at Megan Racing this Friday to do a little chit chat about future plans and it it so happens a little toy was waiting for me that I didn't know about.
The Mid pipe I've been waiting for has finally arrived! !
I wasted no time and installed it that night at Buddha Concept Designs. The Megan Mid pipe was design for the GS300&GS350 and its a simple bolt on. But with some helpful advice from my friend and fellow Clublexus Member "MasBoy", modifications to the GS430 was very minor. In the way on the 430 models is the heat shield which needed to be trimmed in the center of the "Y". After looking closer, It was actually easier than we thought. We went caveman style and we did was hammer in the edges where the pipes hit the shield, though you do have to be careful because if you bang the heat shield in the wrong direction the diff could start hitting it. Unfortunately I didn't get any photos while I was under the car but as soon as the lifts free, I will update this thread with photos underneath the car and the modifications. The install was real easy, also helped that I have a lift to my disposal. Piping is beautifully made and love the little roar I got out of it! Kudos to Megan racing for such a great product.
Heres a link to the item.
http://www.meganracing.com/products/...d=265&catid=20
as stated it's for the 300's and 350's but with little modifications it can fit the 430's. As far as 460's and H I have no idea.
Here are a few test clips shot after the car was done.
Revved a little louder at the shop and did another video at my home a few days later.
Megan mid pipe is stacked with the Greddy Evo3 and I have a Injen Intake from the 2nd gen GS430 which also needed a small mod to fit
Enjoy my friends
New Megan mid pipe stacked with Greddy axle back - YouTube
GS430 Greddy axle back, Megan mid pipe and Injen intake - YouTube
#19
Driver School Candidate
Join Date: Dec 2012
Location: Ky
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Yogi, Just bought my midpipes this morning they should be here for me to install this weekend, I really appreciate your response
#20
Driver School Candidate
Join Date: Jul 2016
Location: cayman brac
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hola Mi Amigos!
Stopped by the good people over at Megan Racing this Friday to do a little chit chat about future plans and it it so happens a little toy was waiting for me that I didn't know about.
The Mid pipe I've been waiting for has finally arrived! !
I wasted no time and installed it that night at Buddha Concept Designs. The Megan Mid pipe was design for the GS300&GS350 and its a simple bolt on. But with some helpful advice from my friend and fellow Clublexus Member "MasBoy", modifications to the GS430 was very minor. In the way on the 430 models is the heat shield which needed to be trimmed in the center of the "Y". After looking closer, It was actually easier than we thought. We went caveman style and we did was hammer in the edges where the pipes hit the shield, though you do have to be careful because if you bang the heat shield in the wrong direction the diff could start hitting it. Unfortunately I didn't get any photos while I was under the car but as soon as the lifts free, I will update this thread with photos underneath the car and the modifications. The install was real easy, also helped that I have a lift to my disposal. Piping is beautifully made and love the little roar I got out of it! Kudos to Megan racing for such a great product.
Heres a link to the item.
http://www.meganracing.com/products/...d=265&catid=20
as stated it's for the 300's and 350's but with little modifications it can fit the 430's. As far as 460's and H I have no idea.
Here are a few test clips shot after the car was done.
Revved a little louder at the shop and did another video at my home a few days later.
Megan mid pipe is stacked with the Greddy Evo3 and I have a Injen Intake from the 2nd gen GS430 which also needed a small mod to fit
Enjoy my friends
New Megan mid pipe stacked with Greddy axle back - YouTube
GS430 Greddy axle back, Megan mid pipe and Injen intake - YouTube
Stopped by the good people over at Megan Racing this Friday to do a little chit chat about future plans and it it so happens a little toy was waiting for me that I didn't know about.
The Mid pipe I've been waiting for has finally arrived! !
I wasted no time and installed it that night at Buddha Concept Designs. The Megan Mid pipe was design for the GS300&GS350 and its a simple bolt on. But with some helpful advice from my friend and fellow Clublexus Member "MasBoy", modifications to the GS430 was very minor. In the way on the 430 models is the heat shield which needed to be trimmed in the center of the "Y". After looking closer, It was actually easier than we thought. We went caveman style and we did was hammer in the edges where the pipes hit the shield, though you do have to be careful because if you bang the heat shield in the wrong direction the diff could start hitting it. Unfortunately I didn't get any photos while I was under the car but as soon as the lifts free, I will update this thread with photos underneath the car and the modifications. The install was real easy, also helped that I have a lift to my disposal. Piping is beautifully made and love the little roar I got out of it! Kudos to Megan racing for such a great product.
Heres a link to the item.
http://www.meganracing.com/products/...d=265&catid=20
as stated it's for the 300's and 350's but with little modifications it can fit the 430's. As far as 460's and H I have no idea.
Here are a few test clips shot after the car was done.
Revved a little louder at the shop and did another video at my home a few days later.
Megan mid pipe is stacked with the Greddy Evo3 and I have a Injen Intake from the 2nd gen GS430 which also needed a small mod to fit
Enjoy my friends
New Megan mid pipe stacked with Greddy axle back - YouTube
GS430 Greddy axle back, Megan mid pipe and Injen intake - YouTube
06 gs430 with stock header+ invidia midpipe + HKS hi power exhaust. no check engine light just a lil mod to heat shield and your good to go.
Thread
Thread Starter
Forum
Replies
Last Post
LSin75033
LS - 4th Gen (2007-2017)
12
05-26-21 01:18 PM