Video of newly installed Megan Mid Pipe (GS430)
#1
Video of newly installed Megan Mid Pipe (GS430)
Hola Mi Amigos!
Stopped by the good people over at Megan Racing this Friday to do a little chit chat about future plans and it it so happens a little toy was waiting for me that I didn't know about.
The Mid pipe I've been waiting for has finally arrived! !
I wasted no time and installed it that night at Buddha Concept Designs. The Megan Mid pipe was design for the GS300&GS350 and its a simple bolt on. But with some helpful advice from my friend and fellow Clublexus Member "MasBoy", modifications to the GS430 was very minor. In the way on the 430 models is the heat shield which needed to be trimmed in the center of the "Y". After looking closer, It was actually easier than we thought. We went caveman style and we did was hammer in the edges where the pipes hit the shield, though you do have to be careful because if you bang the heat shield in the wrong direction the diff could start hitting it. Unfortunately I didn't get any photos while I was under the car but as soon as the lifts free, I will update this thread with photos underneath the car and the modifications. The install was real easy, also helped that I have a lift to my disposal. Piping is beautifully made and love the little roar I got out of it! Kudos to Megan racing for such a great product.
Heres a link to the item.
http://www.meganracing.com/products/...d=265&catid=20
as stated it's for the 300's and 350's but with little modifications it can fit the 430's. As far as 460's and H I have no idea.
Here are a few test clips shot after the car was done.
Revved a little louder at the shop and did another video at my home a few days later.
Megan mid pipe is stacked with the Greddy Evo3 and I have a Injen Intake from the 2nd gen GS430 which also needed a small mod to fit
Enjoy my friends
Stopped by the good people over at Megan Racing this Friday to do a little chit chat about future plans and it it so happens a little toy was waiting for me that I didn't know about.
The Mid pipe I've been waiting for has finally arrived! !
I wasted no time and installed it that night at Buddha Concept Designs. The Megan Mid pipe was design for the GS300&GS350 and its a simple bolt on. But with some helpful advice from my friend and fellow Clublexus Member "MasBoy", modifications to the GS430 was very minor. In the way on the 430 models is the heat shield which needed to be trimmed in the center of the "Y". After looking closer, It was actually easier than we thought. We went caveman style and we did was hammer in the edges where the pipes hit the shield, though you do have to be careful because if you bang the heat shield in the wrong direction the diff could start hitting it. Unfortunately I didn't get any photos while I was under the car but as soon as the lifts free, I will update this thread with photos underneath the car and the modifications. The install was real easy, also helped that I have a lift to my disposal. Piping is beautifully made and love the little roar I got out of it! Kudos to Megan racing for such a great product.
Heres a link to the item.
http://www.meganracing.com/products/...d=265&catid=20
as stated it's for the 300's and 350's but with little modifications it can fit the 430's. As far as 460's and H I have no idea.
Here are a few test clips shot after the car was done.
Revved a little louder at the shop and did another video at my home a few days later.
Megan mid pipe is stacked with the Greddy Evo3 and I have a Injen Intake from the 2nd gen GS430 which also needed a small mod to fit
Enjoy my friends
Last edited by YogiFTLC; 02-01-15 at 10:10 PM.
The following users liked this post:
mase929 (05-24-19)
#6
Pole Position
iTrader: (1)
Join Date: Aug 2014
Location: SoCal, Northridge 818,310,323,626
Posts: 302
Likes: 0
Received 4 Likes
on
4 Posts
As koffeblack has mentioned above, being that we're both living in sunny and sexy socal, worried about CEL as Megan's site mentioned it MAY come on as well. Did it come on on yours?
Other than that, you and Masboy is paving a pathway for our 430s! Keep it up my man and time to turn up. Haha
Other than that, you and Masboy is paving a pathway for our 430s! Keep it up my man and time to turn up. Haha
#7
I am not Aussie but I have really good friends from Sydney, Perth & Queensland that visit often and they've been converting me ever since *Closes Veggiemite bottle* hahah.
As koffeblack has mentioned above, being that we're both living in sunny and sexy socal, worried about CEL as Megan's site mentioned it MAY come on as well. Did it come on on yours?|
Other than that, you and Masboy is paving a pathway for our 430s! Keep it up my man and time to turn up. Haha
Other than that, you and Masboy is paving a pathway for our 430s! Keep it up my man and time to turn up. Haha
Not a problem at all on mine. Someone bumped Masboy's thread and looks like he's been good too.
Thanks!
Thank you my friend!