Dismantling Starter of GS300 year 2006
08-12-14, 09:30 AM
#1
Rookie
Thread Starter
Join Date: Apr 2012
Location: Cambodia
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Dismantling Starter of GS300 year 2006
From the service manual, I think there are only 2 bolts and a few connectors to take out. But Is this a very difficult job to take out the starter? Do I need to take out the top of the engine to access to the starter?
08-13-14, 07:57 AM
#2
Rookie
Thread Starter
Join Date: Apr 2012
Location: Cambodia
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
While changing the engine mounts, I had the opportunity to survey how to remove the starter.
I think an exhaust pipe near to it has to be removed in order to access the other starter mounting bolt. It should be a relatively simple job.
I think an exhaust pipe near to it has to be removed in order to access the other starter mounting bolt. It should be a relatively simple job.
Thread
Thread Starter
Forum
Replies
Last Post